Subject: [PATCH 04/27] ARM: EXYNOS: Support secondary CPU boot of Exynos4212

From: [email-masked] (Chanwoo Choi)
Date: Fri, 11 Apr 2014 14:14:01 +0900

Hi,

On 04/11/2014 10:44 AM, Olof Johansson wrote:
> On Thu, Apr 10, 2014 at 06:37:15PM +0900, Chanwoo Choi wrote:
>> From: Kyungmin Park <[email-masked]>
>>
>> This patch fix the offset of CPU boot address and change parameter of smc call
>> of SMC_CMD_CPU1BOOT command for Exynos4212.
>>
>> Signed-off-by: Kyungmin Park <[email-masked]>
>> ---
>>  arch/arm/mach-exynos/firmware.c | 14 ++++++++++++--
>>  1 file changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
>> index 932129e..91a911d 100644
>> --- a/arch/arm/mach-exynos/firmware.c
>> +++ b/arch/arm/mach-exynos/firmware.c
>> @@ -18,6 +18,8 @@
>>  
>>  #include <mach/map.h>
>>  
>> +#include <plat/cpu.h>
>> +
>>  #include "smc.h"
>>  
>>  static int exynos_do_idle(void)
>> @@ -28,14 +30,22 @@ static int exynos_do_idle(void)
>>  
>>  static int exynos_cpu_boot(int cpu)
>>  {
>> -	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
>> +	if (soc_is_exynos4212())
>> +		exynos_smc(SMC_CMD_CPU1BOOT, 0, 0, 0);
>> +	else
>> +		exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
> 
> 	/* <explain why you need this special case on 4212> */

It's better to ask system lsi person. We don't know it well.
I got the guide about secondary boot from system lsi.
But, this patch was completely tested.

> 	if (soc_is_exynos4212())
> 		cpu = 0;
> 
> ...and then do the call as before.

OK, I'll modify it as following:

 static int exynos_cpu_boot(int cpu)
 {
+       if (soc_is_exynos4212())
+               cpu = 0;
+
        exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
        return 0;
 }

> 
> 
>>  	return 0;
>>  }
>>  
>>  static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
>>  {
>> -	void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu;
>> +	void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c;
>>  
>> +	if (soc_is_exynos4212())
>> +		goto out;
>> +	else
>> +		boot_reg += 4*cpu;
> 
> 	if (!soc_is_exynos4212())
> 		boot_reg += 4 * cpu;
> 
> That way you avoid a goto, especially since the "goto out" isn't actually
> an "out", it's still doing stuff at the end of the funciton.
> 

OK, I'll remove goto statement and then modify it as your comment.

-       void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu;
+       void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c;
+
+       if (!soc_is_exynos4212())
+               boot_reg += 4*cpu;

Best Regards,
Chanwoo Choi