Subject: [PATCH 5/8] ARM: mvebu: Add Device Tree description of xHCI hosts on Armada 38x

From: [email-masked] (Sebastian Hesselbarth)
Date: Fri, 18 Apr 2014 13:23:20 +0200

On 04/18/2014 12:22 PM, Gregory CLEMENT wrote:
> The Marvell Armada 38x SoCs contain two xHCI host. This commit adds
> the Device Tree description of those interfaces at the SoC level, and
> also enables the two USB3 ports on the Armada 385 DB platform and one
> USB3 port on the Armada 385 RD platforms.
> 
> Signed-off-by: Gregory CLEMENT <[email-masked]>
> ---
>  arch/arm/boot/dts/armada-385-db.dts |  8 ++++++++
>  arch/arm/boot/dts/armada-385-rd.dts |  4 ++++
>  arch/arm/boot/dts/armada-38x.dtsi   | 17 +++++++++++++++++
>  3 files changed, 29 insertions(+)
[...]
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index a064f59da02d..4f117e66aa1a 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -355,6 +355,23 @@
>  				clocks = <&coredivclk 0>;
>  				status = "disabled";
>  			};
> +
> +			usb3 at f0000 {
> +				compatible = "marvell,xhci-armada-380";
> +				reg = <0xf0000 0x3fff>,<0xf4000 0x3fff>;
> +				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gateclk 9>;

Using generic PHY framework will allow you to reference the PHY nodes
with "usb-phy" here.

BTW, you added a "marvell,armada-380-usb-utmi" in the patch for PHY init
but I can see no corresponding node added.

Sebastian

> +				status = "disabled";
> +			};
> +
> +			usb3 at f8000 {
> +				compatible = "marvell,xhci-armada-380";
> +				reg = <0xf8000 0x3fff>,<0xfc000 0x3fff>;
> +				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gateclk 10>;
> +				status = "disabled";
> +			};
> +
>  		};
>  	};
>  
>