Subject: [PATCH] ARM: EXYNOS: cpu hotplug: use v7_exit_coherency_flush macro for cache disabling

From: [email-masked] (Daniel Lezcano)
Date: Tue, 22 Apr 2014 16:36:34 +0200

On 04/22/2014 04:18 PM, Leela Krishna Amudala wrote:
> Remove the duplicated code for cache disabling and use "v7_exit_coherency_flush"
> macro to do the same job.

Hi Leela,

thanks for this patch! It would be nice if you can describe why those 
macros can be replaced by the generic v7_exit_coherency_flush macro.

>
> Signed-off-by: Leela Krishna Amudala <[email-masked]>
>
> ---
> cpu hotplug is tested with 3.15-rc1 on Origen(which has cortex A9) and
> Arndale octa(which has cortex A7 and A15) boards.
>
>   arch/arm/mach-exynos/hotplug.c |   56 ++--------------------------------------
>   1 file changed, 2 insertions(+), 54 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
> index 5eead53..9eb8d1b 100644
> --- a/arch/arm/mach-exynos/hotplug.c
> +++ b/arch/arm/mach-exynos/hotplug.c
> @@ -24,56 +24,6 @@
>   #include "common.h"
>   #include "regs-pmu.h"
>
> -static inline void cpu_enter_lowpower_a9(void)
> -{
> -	unsigned int v;
> -
> -	asm volatile(
> -	"	mcr	p15, 0, %1, c7, c5, 0\n"
> -	"	mcr	p15, 0, %1, c7, c10, 4\n"
> -	/*
> -	 * Turn off coherency
> -	 */
> -	"	mrc	p15, 0, %0, c1, c0, 1\n"
> -	"	bic	%0, %0, %3\n"
> -	"	mcr	p15, 0, %0, c1, c0, 1\n"
> -	"	mrc	p15, 0, %0, c1, c0, 0\n"
> -	"	bic	%0, %0, %2\n"
> -	"	mcr	p15, 0, %0, c1, c0, 0\n"
> -	  : "=&r" (v)
> -	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
> -	  : "cc");
> -}
> -
> -static inline void cpu_enter_lowpower_a15(void)
> -{
> -	unsigned int v;
> -
> -	asm volatile(
> -	"	mrc	p15, 0, %0, c1, c0, 0\n"
> -	"	bic	%0, %0, %1\n"
> -	"	mcr	p15, 0, %0, c1, c0, 0\n"
> -	  : "=&r" (v)
> -	  : "Ir" (CR_C)
> -	  : "cc");
> -
> -	flush_cache_louis();
> -
> -	asm volatile(
> -	/*
> -	* Turn off coherency
> -	*/
> -	"	mrc	p15, 0, %0, c1, c0, 1\n"
> -	"	bic	%0, %0, %1\n"
> -	"	mcr	p15, 0, %0, c1, c0, 1\n"
> -	: "=&r" (v)
> -	: "Ir" (0x40)
> -	: "cc");
> -
> -	isb();
> -	dsb();
> -}
> -
>   static inline void cpu_leave_lowpower(void)
>   {
>   	unsigned int v;
> @@ -141,10 +91,8 @@ void __ref exynos_cpu_die(unsigned int cpu)
>   	 * appropriate sequence for entering low power.
>   	 */
>   	asm("mrc p15, 0, %0, c0, c0, 0" : "=r"(primary_part) : : "cc");

Can't you remove this asm line above as well as the primary_part variable ?

> -	if ((primary_part & 0xfff0) == 0xc0f0)
> -		cpu_enter_lowpower_a15();
> -	else
> -		cpu_enter_lowpower_a9();
> +
> +	v7_exit_coherency_flush(louis);
>
>   	platform_do_lowpower(cpu, &spurious);
>
>

-- 
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog