Subject: [PATCH v2 1/9] ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf

From: [email-masked] (Sergei Shtylyov)
Date: Thu, 24 Apr 2014 00:42:19 +0400

Hello.

On 04/23/2014 11:34 PM, Heiko St?bner wrote:

> The s3c24xx cpufreq driver needs to change the mpll speed and was doing
> this by writing raw values from a translation table into the MPLLCON
> register.

> Change this to use a regular clk_set_rate call when using the common
> clock framework and only write the raw value in the samsung_clock case.

> To not needing to create additional infrastructure for this, the mpll clock
> is requested at the first call to s3c2410_set_fvco().

> Signed-off-by: Heiko Stuebner <[email-masked]>
> ---
>   arch/arm/mach-s3c24xx/cpufreq-utils.c | 14 ++++++++++++++
>   1 file changed, 14 insertions(+)

> diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c
> index 2a0aa56..d5e797b 100644
> --- a/arch/arm/mach-s3c24xx/cpufreq-utils.c
> +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c
[...]
> @@ -60,5 +61,18 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
>    */
>   void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
>   {
> +#ifdef CONFIG_SAMSUNG_CLOCK
>   	__raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON);
> +#endif
> +
> +#ifdef CONFIG_COMMON_CLK
> +	static struct clk *mpll;
> +
> +	if (!mpll)

    You are testing uninitialized variable. This check wouldn't make much 
sense even if the variable was initialized.

> +		mpll = clk_get(NULL, "mpll")
> +	if (IS_ERR(mpll))
> +		return;
> +
> +	clk_set_rate(mpll, cfg->pll.frequency);
> +#endif
>   }

WBR, Sergei