Subject: [PATCHv4 7/7] ARM: dts: Add device tree sources for Exynos3250

From: [email-masked] (Tomasz Figa)
Date: Sat, 26 Apr 2014 13:38:00 +0200

On 26.04.2014 02:51, Tomasz Figa wrote:
> Hi Chanwoo,
>
> On 25.04.2014 03:16, Chanwoo Choi wrote:
>> From: Tomasz Figa <[email-masked]>
>>
>> This patch add new exynos3250.dtsi to support Exynos3250 SoC based on
>> Cortex-A7
>> dual core and includes following dt nodes:
>>
>> - GIC interrupt controller
>> - Pinctrl to control GPIOs
>> - Clock controller
>> - CPU information (Cortex-A7 dual core)
>> - UART to support serial port
>> - MCT (Multi Core Timer)
>> - ADC (Analog Digital Converter)
>> - I2C/SPI bus
>> - Power domain
>> - PMU (Performance Monitoring Unit)
>> - MSHC (Mobile Storage Host Controller)
>> - PWM (Pluse Width Modulation)
>> - AMBA bus
>>
>> Signed-off-by: Tomasz Figa <[email-masked]>
>> Signed-off-by: Chanwoo Choi <[email-masked]>
>> Signed-off-by: Kyungmin Park <[email-masked]>
>> Signed-off-by: Inki Dae <[email-masked]>
>> Signed-off-by: Hyunhee Kim <[email-masked]>
>> Signed-off-by: Jaehoon Chung <[email-masked]>
>> Signed-off-by: Bartlomiej Zolnierkiewicz <[email-masked]>
>> Cc: Ben Dooks <[email-masked]>
>> Cc: Kukjin Kim <[email-masked]>
>> Cc: Rob Herring <[email-masked]>
>> Cc: Pawel Moll <[email-masked]>
>> Cc: Mark Rutland <[email-masked]>
>> Cc: Ian Campbell <[email-masked]>
>> Cc: Kumar Gala <[email-masked]>
>> Cc: Russell King <[email-masked]>
>> Cc: devicetree at vger.kernel.org
>> ---
>>   arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 477 +++++++++++++++
>>   arch/arm/boot/dts/exynos3250.dtsi         | 405 +++++++++++++
>>   arch/arm/boot/dts/exynos4212-tizenw.dts   | 926
>> ++++++++++++++++++++++++++++++
>>   3 files changed, 1808 insertions(+)
>>   create mode 100644 arch/arm/boot/dts/exynos3250-pinctrl.dtsi
>>   create mode 100644 arch/arm/boot/dts/exynos3250.dtsi
>>   create mode 100644 arch/arm/boot/dts/exynos4212-tizenw.dts
>>
>> diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
>> b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
>> new file mode 100644
>> index 0000000..976490b
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
>> @@ -0,0 +1,477 @@
>> +/*
>> + * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
>> + *
>> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
>> + *        http://www.samsung.com
>> + *
>> + * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are
>> listed as device
>> + * tree nodes are listed in this file.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +/ {
>> +    pinctrl at 11400000 {
>
> Could you use references instead of re-specifying the whole tree
> hierarchy in every file a node is used?
>
> Instead of
>
> / {
>      pinctrl at 11400000 {
>
>      };
> };
>
> one may simply use
>
> &pinctrl_0 {
>
> };
>
> You might just need to change the location of #include
> "exynos3250-pinctrl.dtsi" from top of exynos3250.dtsi to bottom of it.

Oh, well, you also should move all nodes of on-SoC devices under a 
simple-bus node called soc. You can see the patch adding dts file for 
Exynos5260 for an example [1].

[1] http://thread.gmane.org/gmane.linux.kernel.samsung-soc/29360/focus=29361

Best regards,
Tomasz