Subject: [STLinux Kernel] [PATCH v4 2/7] driver: reset: sti: add keyscan for stih415

From: [email-masked] (Maxime Coquelin)
Date: Wed, 14 May 2014 10:51:55 +0200

Hi Philipp,

	I am preparing the arm_soc pull request for STi platforms.

	In this series, there are DT patches depending on this reset patch 
(same for patch 3).

	Can I queue theses two reset patches in my pull request for arm_soc to 
avoid compilation breakage?

Best regards,
Maxime

On 04/11/2014 05:07 PM, Gabriel FERNANDEZ wrote:
> Add keyscan reset on stih415 reset controller.
>
> Signed-off-by: Giuseppe Condorelli <[email-masked]>
> Signed-off-by: Gabriel Fernandez <[email-masked]>
> ---
>   drivers/reset/sti/reset-stih415.c                     | 1 +
>   include/dt-bindings/reset-controller/stih415-resets.h | 1 +
>   2 files changed, 2 insertions(+)
>
> diff --git a/drivers/reset/sti/reset-stih415.c b/drivers/reset/sti/reset-stih415.c
> index e6f6c41..c93fd26 100644
> --- a/drivers/reset/sti/reset-stih415.c
> +++ b/drivers/reset/sti/reset-stih415.c
> @@ -73,6 +73,7 @@ static const struct syscfg_reset_channel_data stih415_softresets[] = {
>   	[STIH415_USB0_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 9),
>   	[STIH415_USB1_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 10),
>   	[STIH415_USB2_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 11),
> +	[STIH415_KEYSCAN_SOFTRESET] = STIH415_SRST_LPM(LPM_SYSCFG_1, 8),
>   };
>
>   static struct syscfg_reset_controller_data stih415_powerdown_controller = {
> diff --git a/include/dt-bindings/reset-controller/stih415-resets.h b/include/dt-bindings/reset-controller/stih415-resets.h
> index c2f8a66..c2329fe 100644
> --- a/include/dt-bindings/reset-controller/stih415-resets.h
> +++ b/include/dt-bindings/reset-controller/stih415-resets.h
> @@ -22,5 +22,6 @@
>   #define STIH415_USB0_SOFTRESET		3
>   #define STIH415_USB1_SOFTRESET		4
>   #define STIH415_USB2_SOFTRESET		5
> +#define STIH415_KEYSCAN_SOFTRESET	6
>
>   #endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH415 */
>