Subject: [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards

From: [email-masked] (Kukjin Kim)
Date: Fri, 16 May 2014 05:02:35 +0900

On 05/16/14 04:25, Tomasz Figa wrote:
> Hi Rahul,
>
> On 15.05.2014 17:04, Rahul Sharma wrote:
>> From: Rahul Sharma<[email-masked]>
>>
>> Enable hdmi for exynos5250 based snow board, exynos5420
>> based peach pit board and 5800 based peach-pi board.
>>
>> V5:
>> 1) Moved hdmi_hpd_irq pin back to board files.
>> 2) Replaced 0 with GPIO_ACTIVE_HIGH while adding gpio property
>> to HDMI node.
>>
>> V4:
>> 1) Removed hdmi_hpd_irq pin from peach-pi board as it already
>> present in exynos5420-pinctrl.dtsi.
>>
>> V3:
>> 1) Re-spin on dependent patches.
>> 2) Added patch to enable hdmi for Peach-pi board.
>>
>> V2:
>> 1) Re-spin on dependent patches.
>> 2) Added patch to remove chip specific hdmi hpd gpio from
>> board file top SoC file.
>>
>> This series is based on Kukjin Kims, for-next branch.
>>
>> It is dependent on
>>
>> 1) Sachin's patch: "ARM: dts: exynos5250-snow: add tps65090 power regulator"
>> at https://patches.linaro.org/28325/ : [Reviewed-by: Doug Anderson]
>>
>> All other dependent patches are already landed in maintainers
>> tree.
>>
>> Rahul Sharma (4):
>>    ARM: dts: enable hdmi for exynos5250 based snow board
>>    ARM: dts: change to correct compatible string for exynos5420 hdmi
>>    ARM: dts: enable hdmi for exynos5420 based peach-pit board
>>    ARM: dts: enable hdmi for exynos5800 based peach-pi board
>>
>>   arch/arm/boot/dts/exynos5250-cros-common.dtsi |    6 +++++-
>>   arch/arm/boot/dts/exynos5250-snow.dts         |   14 ++++++++++++++
>>   arch/arm/boot/dts/exynos5420-peach-pit.dts    |   22 ++++++++++++++++++++++
>>   arch/arm/boot/dts/exynos5420.dtsi             |    7 ++++++-
>>   arch/arm/boot/dts/exynos5800-peach-pi.dts     |   22 ++++++++++++++++++++++
>>   5 files changed, 69 insertions(+), 2 deletions(-)
>>
>
> For the whole series:
>
> Acked-by: Tomasz Figa<[email-masked]>
>
Looks good to me too.

Applied but not for-next yet because need to check the status of the 
tps65090 related patches you mentioned...

Thanks,
Kukjin