Subject: [PATCH v4 4/4] clk: samsung: exynos5420: Setup clocks before system suspend

From: [email-masked] (Tomasz Figa)
Date: Thu, 15 May 2014 23:18:40 +0200

Hi Abhilash,

On 13.05.2014 14:02, Abhilash Kesavan wrote:
> Prior to suspending the system, we need to ensure that certain
> clock source and gate registers are unmasked.
> 
> Signed-off-by: Vikas Sajjan <[email-masked]>
> Signed-off-by: Abhilash Kesavan <[email-masked]>
> ---
>  drivers/clk/samsung/clk-exynos5420.c |   25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
> index e576456..dd509d1 100644
> --- a/drivers/clk/samsung/clk-exynos5420.c
> +++ b/drivers/clk/samsung/clk-exynos5420.c
> @@ -28,6 +28,7 @@
>  #define GATE_BUS_CPU		0x700
>  #define GATE_SCLK_CPU		0x800
>  #define CLKOUT_CMU_CPU		0xa00
> +#define SRC_MASK_CPERI		0x4300
>  #define GATE_IP_G2D		0x8800
>  #define CPLL_LOCK		0x10020
>  #define DPLL_LOCK		0x10030
> @@ -66,6 +67,8 @@
>  #define SRC_TOP10		0x10280
>  #define SRC_TOP11		0x10284
>  #define SRC_TOP12		0x10288
> +#define SRC_MASK_TOP0		0x10300
> +#define SRC_MASK_TOP1		0x10304
>  #define SRC_MASK_TOP2		0x10308
>  #define SRC_MASK_TOP7		0x1031c
>  #define SRC_MASK_DISP10		0x1032c
> @@ -73,6 +76,7 @@
>  #define SRC_MASK_FSYS		0x10340
>  #define SRC_MASK_PERIC0		0x10350
>  #define SRC_MASK_PERIC1		0x10354
> +#define SRC_MASK_ISP		0x10370
>  #define DIV_TOP0		0x10500
>  #define DIV_TOP1		0x10504
>  #define DIV_TOP2		0x10508
> @@ -91,6 +95,7 @@
>  #define DIV2_RATIO0		0x10590
>  #define DIV4_RATIO		0x105a0
>  #define GATE_BUS_TOP		0x10700
> +#define GATE_BUS_DISP1		0x10728
>  #define GATE_BUS_GEN		0x1073c
>  #define GATE_BUS_FSYS0		0x10740
>  #define GATE_BUS_FSYS2		0x10748
> @@ -115,6 +120,7 @@
>  #define GATE_TOP_SCLK_MAU	0x1083c
>  #define GATE_TOP_SCLK_FSYS	0x10840
>  #define GATE_TOP_SCLK_PERIC	0x10850
> +#define GATE_IP_PERIC		0x10950
>  #define TOP_SPARE2		0x10b08
>  #define BPLL_LOCK		0x20010
>  #define BPLL_CON0		0x20110
> @@ -222,11 +228,30 @@ static unsigned long exynos5420_clk_regs[] __initdata = {
>  	DIV_KFC0,
>  };
>  
> +static const struct samsung_clk_reg_dump exynos5420_set_clksrc[] = {
> +	{ .offset = SRC_MASK_CPERI,		.value = 0xffffffff, },
> +	{ .offset = SRC_MASK_TOP0,		.value = 0x11111111, },
> +	{ .offset = SRC_MASK_TOP1,		.value = 0x11101111, },
> +	{ .offset = SRC_MASK_TOP2,		.value = 0x11111110, },
> +	{ .offset = SRC_MASK_TOP7,		.value = 0x00111100, },
> +	{ .offset = SRC_MASK_DISP10,		.value = 0x11111110, },
> +	{ .offset = SRC_MASK_MAU,		.value = 0x10000000, },
> +	{ .offset = SRC_MASK_FSYS,		.value = 0x11111110, },
> +	{ .offset = SRC_MASK_PERIC0,		.value = 0x11111110, },
> +	{ .offset = SRC_MASK_PERIC1,		.value = 0x11111100, },
> +	{ .offset = SRC_MASK_ISP,		.value = 0x11111000, },
> +	{ .offset = GATE_BUS_DISP1,		.value = 0xffffffff, },
> +	{ .offset = GATE_IP_PERIC,		.value = 0xffffffff, },
> +};
> +
>  static int exynos5420_clk_suspend(void)
>  {
>  	samsung_clk_save(reg_base, exynos5420_save,
>  				ARRAY_SIZE(exynos5420_clk_regs));
>  
> +	samsung_clk_restore(reg_base, exynos5420_set_clksrc,
> +				ARRAY_SIZE(exynos5420_set_clksrc));
> +
>  	return 0;
>  }

Don't you also need to add those registers to normal suspend/resume
list, so the values before setting the pre-suspend values are saved on
suspend and then restored on resume?

Otherwise looks good.

Best regards,
Tomasz