From: gregory.clement@free-electrons•com (Gregory CLEMENT)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 4/5] usb: host: xhci-plat: add optional PHY support
Date: Fri, 23 May 2014 23:39:14 +0200 [thread overview]
Message-ID: <537FC002.6080701@free-electrons.com> (raw)
In-Reply-To: <537F14D4.1090705@ti.com>
On 23/05/2014 11:28, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Friday 16 May 2014 09:52 PM, Gregory CLEMENT wrote:
>> This commit extends the xhci-plat so that it can optionally be passed
>> a reference to a PHY through the Device Tree. It will be useful for
>> the Armada 375 SoCs. If no PHY is provided then the behavior of the
>> driver is unchanged.
>>
>> As for the clock, to achieve this, it adds a 'struct phy *' member in
>> xhci_hcd. While only used for now in xhci-plat, here again, it might
>> be used by other drivers in the future.
>>
>> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons•com>
>> ---
>> drivers/usb/host/xhci-plat.c | 29 ++++++++++++++++++++++++++++-
>> drivers/usb/host/xhci.h | 2 ++
>> 2 files changed, 30 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
>> index 0f5f4c8f5bf6..34239b582621 100644
>> --- a/drivers/usb/host/xhci-plat.c
>> +++ b/drivers/usb/host/xhci-plat.c
>> @@ -15,6 +15,7 @@
>> #include <linux/dma-mapping.h>
>> #include <linux/module.h>
>> #include <linux/of.h>
>> +#include <linux/phy/phy.h>
>> #include <linux/platform_device.h>
>> #include <linux/slab.h>
>>
>> @@ -94,6 +95,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
>> struct resource *res;
>> struct usb_hcd *hcd;
>> struct clk *clk;
>> + struct phy *phy;
>> int ret;
>> int irq;
>>
>> @@ -160,9 +162,23 @@ static int xhci_plat_probe(struct platform_device *pdev)
>> goto unmap_registers;
>> }
>>
>> + phy = devm_phy_optional_get(&pdev->dev, "usb");
>> + if (IS_ERR(phy)) {
>> + ret = PTR_ERR(phy);
>> + goto disable_clk;
>> + } else {
>> + ret = phy_init(phy);
>> + if (ret)
>> + goto disable_phy;
> s
> I think you meant disable_clk here?
yes indeed!
>> +
>> + ret = phy_power_on(phy);
>> + if (ret)
>> + goto disable_phy;
>> + }
>> +
>> ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
>> if (ret)
>> - goto disable_clk;
>> + goto power_off_phy;
>>
>> device_wakeup_enable(hcd->self.controller);
>>
>> @@ -198,6 +214,12 @@ put_usb3_hcd:
>> dealloc_usb2_hcd:
>> usb_remove_hcd(hcd);
>>
>> +power_off_phy:
>> + if (!IS_ERR(phy))
>
> This check is unnecessary here since you do power_off only if PHY is not error.
Good catch again!
>> + phy_power_off(phy);
>> +disable_phy:
>> + if (!IS_ERR(phy))
>
> same here..
I agree
>> + phy_exit(phy);
>> disable_clk:
>> if (!IS_ERR(clk))
>> clk_disable_unprepare(clk);
>> @@ -219,6 +241,7 @@ static int xhci_plat_remove(struct platform_device *dev)
>> struct usb_hcd *hcd = platform_get_drvdata(dev);
>> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
>> struct clk *clk = xhci->clk;
>> + struct phy *phy = xhci->phy;
>>
>> usb_remove_hcd(xhci->shared_hcd);
>> usb_put_hcd(xhci->shared_hcd);
>> @@ -226,6 +249,10 @@ static int xhci_plat_remove(struct platform_device *dev)
>> usb_remove_hcd(hcd);
>> if (!IS_ERR(clk))
>> clk_disable_unprepare(clk);
>> + if (!IS_ERR(phy)) {
>
> same here..
I agree too
Thanks for you review,
Gregory
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2014-05-23 21:39 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-16 16:22 [PATCH 1/5] phy: add support for USB cluster on the Armada 375 SoC Gregory CLEMENT
2014-05-16 16:22 ` [PATCH 2/5] Documentation: dt-bindings: document the Armada 375 USB cluster binding Gregory CLEMENT
2014-05-23 9:24 ` Kishon Vijay Abraham I
2014-05-23 13:21 ` Andrew Lunn
2014-05-23 13:36 ` Andrew Lunn
2014-05-23 13:52 ` Kishon Vijay Abraham I
2014-05-23 13:59 ` Andrew Lunn
2014-05-23 21:25 ` Gregory CLEMENT
2014-05-23 13:50 ` Kishon Vijay Abraham I
2014-05-23 13:24 ` Gregory CLEMENT
2014-05-16 16:22 ` [PATCH 3/5] ARM: mvebu: add Device Tree description of USB cluster controller on Armada 375 Gregory CLEMENT
2014-05-16 16:22 ` [PATCH 4/5] usb: host: xhci-plat: add optional PHY support Gregory CLEMENT
2014-05-23 9:28 ` Kishon Vijay Abraham I
2014-05-23 21:39 ` Gregory CLEMENT [this message]
2014-05-16 16:22 ` [PATCH 5/5] ARM: mvebu: add PHY support to the dts for the USB controllers on Armada 375 Gregory CLEMENT
2014-05-23 9:20 ` [PATCH 1/5] phy: add support for USB cluster on the Armada 375 SoC Kishon Vijay Abraham I
2014-05-23 21:50 ` Gregory CLEMENT
2014-05-24 6:46 ` Thomas Petazzoni
2014-05-26 9:42 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=537FC002.6080701@free-electrons.com \
--to=gregory.clement@free-electrons$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox