Subject: [PATCH v3 4/7] of: configure the platform device dma parameters

From: [email-masked] (Santosh Shilimkar)
Date: Wed, 28 May 2014 10:04:16 -0400

On Wednesday 28 May 2014 09:32 AM, Linus Walleij wrote:
> On Wed, May 28, 2014 at 3:29 PM, Arnd Bergmann <[email-masked]> wrote:
>> On Wednesday 28 May 2014 10:23:09 Linus Walleij wrote:
> 
>>>         model = "ARM Integrator/AP";
>>>         compatible = "arm,integrator-ap";
>>> +       dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
>>>
>>>         aliases {
>>>                 arm,timer-primary = &timer2;
>>>
>>
>> It looks like you accidentally copied the ranges from keystone, even
>> though that has a 64-bit root bus and you only have 32-bit.
> 
> Nah it was no accident, just good old incompetence ;-)
> 
>> I suspect what you want is
>>
>>         dma-ranges = <0x80000000 0 0x80000000>;
>>
>> to translate dma_addr_t 0x80000000-0xffffffff to phys_addr_t 0x0-0x7fffffff
>> rather than phys_addr_t 0x800000000-0x87fffffff.
>
Interesting. Where does the ROM address space resides on integrator then considering
address 0 is used for DMA.
 
> Thanks, I'll fix up my patch.
> 
Feel free to add my ack after the fixup if you need one.

regards,
Santosh