Subject: [PATCH v2 0/7] ARM: shmobile: koelsch reference: Enable DMA for QSPI

From: [email-masked] (Ben Dooks)
Date: Mon, 02 Jun 2014 14:58:34 +0100

On 02/06/14 14:42, Geert Uytterhoeven wrote:
> This patch series enables DMA support for QSPI on r8a7791/koelsch
> reference.  It's independent from the series "ARM: shmobile: koelsch
> legacy: Enable DMA for QSPI", but it depends on the SHDMA work for r8a7790
> by Ben Dooks (cfr. "[PATCH v2 0/9] Updates Renesas OF-DMA code").
> 
> Changes Compared to previous submission ("[PATCH/RFC 0/7] ARM: shmobile:
> r8a7791: Add preliminary DMA support"):
>   - "[6/7] ARM: shmobile: r8a7791 dtsi: Enable DMA for MSIOF" was dropped,
>   - 2/7 was added,
>   - 7/7 was changed (see changelog in individual patch).
> 
> This was tested on r8a7791/koelsch.
> 
> Performance figures for reading from a QSPI FLASH driven at 24.375 MHz are:
>   - Single:  1.1 Mbps PIO, 23 Mbps DMA
>   - Dual  : 12.7 Mbps PIO, 48 Mbps DMA
>   - Quad  : 13   Mbps PIO, 70 Mbps DMA
> 
> Thanks for your comments!
> 
>   [1/7] DMA: shdma: Add r8a7791 support
>   [2/7] DMA: shdma: Spelling s/controll/control/
>   [3/7] ARM: shmobile: r8a7791 dtsi: add SYS-DMAC clocks
>   [4/7] ARM: shmobile: r8a7791: Add SYS-DMAC channel definitions for bindings
>   [5/7] ARM: shmobile: r8a7791 dtsi: Add SYS-DMAC0 and SYS-DMAC1 nodes
>   [6/7] ARM: shmobile: koelsch dts: Enable sysdma0 and sysdma1
>   [7/7] ARM: shmobile: r8a7791 dtsi: Enable DMA for QSPI
> 
>  Documentation/devicetree/bindings/dma/shdma.txt |   7 +-
>  arch/arm/boot/dts/r8a7791-koelsch.dts           |   8 ++
>  arch/arm/boot/dts/r8a7791.dtsi                  |  79 ++++++++++++++++-
>  drivers/dma/sh/shdmac.c                         |   1 +
>  include/dt-bindings/dma/r8a7791-dma.h           | 111 ++++++++++++++++++++++++
>  5 files changed, 201 insertions(+), 5 deletions(-)
>  create mode 100644 include/dt-bindings/dma/r8a7791-dma.h
> 
> Gr{oetje,eeting}s,

Hi, thanks for testing against the current DMA series, I will try
and get a new series out for you in the next few days with the
changes to use 1 parameter phandles instead of 2 parameter ones.

-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius