Subject: [PATCH 3/4 v2] ARM: DTS: use new compatible string for thermistors in trats2

From: [email-masked] (Chanwoo Choi)
Date: Wed, 25 Jun 2014 15:35:52 +0900

On 06/25/2014 03:29 PM, Naveen Krishna Chatradhi wrote:
> As Murata Manufactures the NTC based thermistors. The vendor
> name in the compatibility is preposed to change to "murata"
> 
> This patch uses the new compatibility string in exynos4412 based
> Trats2 board.
> 
> Signed-off-by: Naveen Krishna Chatradhi <[email-masked]>
> Cc: Chanwoo Choi <[email-masked]>
> ---
> Changes since v1:
> None
> 
>  arch/arm/boot/dts/exynos4412-trats2.dts |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
> index 11967f4..d35755a 100644
> --- a/arch/arm/boot/dts/exynos4412-trats2.dts
> +++ b/arch/arm/boot/dts/exynos4412-trats2.dts
> @@ -771,7 +771,7 @@
>  	};
>  
>  	thermistor-ap at 0 {
> -		compatible = "ntc,ncp15wb473";
> +		compatible = "murata,ncp15wb473";
>  		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
>  		pullup-ohm = <100000>;	 /* 100K */
>  		pulldown-ohm = <100000>; /* 100K */
> @@ -779,7 +779,7 @@
>  	};
>  
>  	thermistor-battery at 1 {
> -		compatible = "ntc,ncp15wb473";
> +		compatible = "murata,ncp15wb473";
>  		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
>  		pullup-ohm = <100000>;	 /* 100K */
>  		pulldown-ohm = <100000>; /* 100K */
> 

Looks good to me.

Reviewed-by: Chanwoo Choi <[email-masked]>

Thanks,
Chanwoo Choi