From: kgene.kim@samsung•com (Kukjin Kim)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH] ARM: dts: remove display power domain for exynos5420
Date: Wed, 16 Jul 2014 08:35:50 +0900 [thread overview]
Message-ID: <53C5BAD6.5030603@samsung.com> (raw)
In-Reply-To: <CAPdUM4P7sijj_-fa_Opuo73ugAW7coUDZ+UnSp_tnjkHacJFVw@mail.gmail.com>
On 07/14/14 18:09, Rahul Sharma wrote:
> Hi Kukjin,
>
Hi Rahul,
> Please consider this patch for your branch. This patch is important
> for Display for Exynos5 boards.
>
OK, I will take this for exynos5420 display for 3.17...BTW I'm not sure
this is a regression for 3.16 or not...if so, please let me know.
Thanks,
Kukjin
> Regards,
> Rahul Sharma.
>
> On 9 July 2014 17:00, Rahul Sharma<rahul.sharma@samsung•com> wrote:
>> Hi Tomasz,
>>
>> On 8 July 2014 21:04, Tomasz Figa<t.figa@samsung•com> wrote:
>>> Hi Rahul,
>>>
>>> On 07.07.2014 15:37, Rahul Sharma wrote:
>>>> Hi Andrej, Inki,
>>>>
>>>> On 18 June 2014 12:06, Rahul Sharma<rahul.sharma@samsung•com> wrote:
>>>>> Hi Andrej,
>>>>>
>>>>> On 18 June 2014 11:46, Andrzej Hajda<a.hajda@samsung•com> wrote:
>>>>>> On 06/17/2014 07:49 AM, Rahul Sharma wrote:
>>>>>>> Hi All,
>>>>>>>
>>>>>>> Please review this patch.
>>>>>>>
>>>>>>> Regards,
>>>>>>> Rahul Sharma
>>>>>>>
>>>>>>> On 9 June 2014 16:58, Rahul Sharma<rahul.sharma@samsung•com> wrote:
>>>>>>>> Display domain is removed due to instability issues. Explaining
>>>>>>>> the problem below:
>>>>>>>>
>>>>>>>> exynos_init_late triggers the pm_genpd_poweroff_unused which
>>>>>>>> powers off the unused power domains. This call hits before
>>>>>>>> the trigger to deferred probes.
>>>>>>>>
>>>>>>>> DRM DP Panel defers the probe due to supply get failure. By the
>>>>>>>> time, deferred probe is scheduled again, Display Power Domain is
>>>>>>>> powered off by pm_genpd_poweroff_unused.
>>>>>>>>
>>>>>>>> FIMD and DP drivers are accessing registers during Probe and Bind
>>>>>>>> callbacks. If display domain is enabled/disabled around register
>>>>>>>> accesses, display domain gets unstable and we are getting Power
>>>>>>>> Domain Disable fail notification. Increasing the Timeout also
>>>>>>>> didn't help.
>>>>>>
>>>>>> As I understand the problem is that fimd and dp drivers access hw
>>>>>> registers without enabling power domain. So the proper solution is to
>>>>>> fix these drivers.
>>>>>
>>>>> That is also a problem but I fixed those accesses in my local kernel before
>>>>> hitting this issue. If we do register accesses in FIMD/DP probe/bind we
>>>>> observes "Prefetch abort" exception. But here the problem is that 'DP
>>>>> domain disable' starts failing if we enable/disable multiple times.
>>>>>
>>>>>>
>>>>>> Btw. there are already patches removing hw access from probe/bind of
>>>>>> fimd. I guess removing also hw access from dp probe/bind could be a good
>>>>>> solution.
>>>>>
>>>>> Please let me know the links for posted patches. I will test with those patches.
>>>>
>>>> Is there any update on this? Please share the patches which fixes the
>>>> above issue or avoid the above scenario of multiple PM Domain enable/disable.
>>>> I will test them for exynos5 based boards. Otherwise we should get this change
>>>> merged else display will remain broken for exynos5 based boards.
>>>
>>> Andrzej is on holidays right now, so he won't be able to reply in this
>>> thread until he's back. Here are two patches I was able to find on the
>>> related MLs that might be fixing the cause of your issues:
>>
>> Ok. thanks for the update.
>>
>> We should test with Ajay's patches which includes DP probe deferring
>> based on availability of bridge chip. +
>>
>> few patches which cleanup register access in FIMD and DP probe/bind
>> OR
>> few patches to enable Display power domain and clocks just before the
>> register access. As done in https://lkml.org/lkml/2014/7/4/188.
>>
>> Later solution results into display power domain enable failure in case of DRM
>> probe defer.
>>
>> I am just curious if Andrej has some solution for the first approach which can
>> be tested for defer probe and S2R scenarios.
>>
>> Regards,
>> Rahul Sharma.
>>
>>>
>>> [PATCH] drm/exynos: remove hardware overlays disable from fimd probe
>>> (https://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg31629.html)
>>>
>>> [PATCH] drm/exynos: fimd: Keep power enabled during fimd_bind
>>> (https://lkml.org/lkml/2014/7/4/188)
next prev parent reply other threads:[~2014-07-15 23:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-09 11:28 [PATCH] ARM: dts: remove display power domain for exynos5420 Rahul Sharma
2014-06-17 5:49 ` Rahul Sharma
2014-06-18 6:16 ` Andrzej Hajda
2014-06-18 6:36 ` Rahul Sharma
2014-07-07 13:37 ` Rahul Sharma
2014-07-08 15:34 ` Tomasz Figa
2014-07-09 11:30 ` Rahul Sharma
2014-07-14 9:09 ` Rahul Sharma
2014-07-15 23:35 ` Kukjin Kim [this message]
2014-07-16 2:25 ` Rahul Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53C5BAD6.5030603@samsung.com \
--to=kgene.kim@samsung$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox