From: emilio@elopez•com.ar (Emilio López)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 6/9] clk: sunxi: mod1 clock support
Date: Sun, 03 Aug 2014 19:11:36 -0300 [thread overview]
Message-ID: <53DEB398.8010109@elopez.com.ar> (raw)
In-Reply-To: <20140803124733.GW3952@lukather>
Hi,
El 03/08/14 a las 09:47, Maxime Ripard escibi?:
> On Thu, Jul 31, 2014 at 06:28:09PM -0300, Emilio L?pez wrote:
>> The module 1 type of clocks consist of a gate and a mux and are used on
>> the audio blocks to mux and gate the PLL2 outputs for AC97, IIS or
>> SPDIF. This commit adds support for them on the sunxi clock driver.
>>
>> Not-signed-off-by: Emilio L?pez <emilio@elopez•com.ar>
>
> Why so?
>
> It looks quite good.
Because I have not tested this with any actual mod1 clients. Once Jon or
Marcus report it's ok I'll be happy to s/Not-s/S/; same with the DT
bindings.
>> ---
>>
>> Changes from RFC:
>> * Document compatible used
>>
>> Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
>> drivers/clk/sunxi/Makefile | 1 +
>> drivers/clk/sunxi/clk-a10-mod1.c | 69 +++++++++++++++++++++++
>> 3 files changed, 71 insertions(+)
>> create mode 100644 drivers/clk/sunxi/clk-a10-mod1.c
>>
>> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
>> index d18b89b..b028ee2 100644
>> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
>> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
>> @@ -50,6 +50,7 @@ Required properties:
>> "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
>> "allwinner,sun4i-a10-codec-clk" - for the codec clock on A10
>> "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
>> + "allwinner,sun4i-a10-mod1-clk" - for the module 1 family of clocks
>> "allwinner,sun7i-a20-out-clk" - for the external output clocks
>> "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
>> "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
>> diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
>> index a7a96f8..75d113d 100644
>> --- a/drivers/clk/sunxi/Makefile
>> +++ b/drivers/clk/sunxi/Makefile
>> @@ -5,6 +5,7 @@
>> obj-y += clk-sunxi.o clk-factors.o
>> obj-y += clk-a10-codec.o
>> obj-y += clk-a10-hosc.o
>> +obj-y += clk-a10-mod1.o
>> obj-y += clk-a10-pll2.o
>> obj-y += clk-a20-gmac.o
>>
>> diff --git a/drivers/clk/sunxi/clk-a10-mod1.c b/drivers/clk/sunxi/clk-a10-mod1.c
>> new file mode 100644
>> index 0000000..09afd54
>> --- /dev/null
>> +++ b/drivers/clk/sunxi/clk-a10-mod1.c
>> @@ -0,0 +1,69 @@
>> +/*
>> + * Copyright 2014 Emilio L?pez
>> + *
>> + * Emilio L?pez <emilio@elopez•com.ar>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +
>> +static DEFINE_SPINLOCK(mod1_lock);
>> +
>> +#define SUN4I_MOD1_ENABLE 31
>> +#define SUN4I_MOD1_MUX 16
>> +#define SUN4I_MOD1_MUX_WIDTH 2
>> +#define SUN4I_MOD1_MAX_PARENTS 4
>> +
>> +static void __init sun4i_mod1_clk_setup(struct device_node *node)
>> +{
>> + struct clk *clk;
>> + struct clk_mux *mux;
>> + struct clk_gate *gate;
>> + const char *parents[4];
>> + const char *clk_name = node->name;
>> + void __iomem *reg;
>> + int i = 0;
>> +
>> + mux = kzalloc(sizeof(*mux), GFP_KERNEL);
>> + gate = kzalloc(sizeof(*gate), GFP_KERNEL);
>> + if (!mux || !gate) {
>> + kfree(mux);
>> + kfree(gate);
>> + return;
>> + }
>> +
>> + of_property_read_string(node, "clock-output-names", &clk_name);
>> + reg = of_iomap(node, 0);
>> +
>> + while (i < SUN4I_MOD1_MAX_PARENTS &&
>> + (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
>> + i++;
>> +
>> + gate->reg = reg;
>> + gate->bit_idx = SUN4I_MOD1_ENABLE;
>> + gate->lock = &mod1_lock;
>> + mux->reg = reg;
>> + mux->shift = SUN4I_MOD1_MUX;
>> + mux->mask = BIT(SUN4I_MOD1_MUX_WIDTH) - 1;
>> + mux->lock = &mod1_lock;
>> +
>> + clk = clk_register_composite(NULL, clk_name, parents, i,
>> + &mux->hw, &clk_mux_ops,
>> + NULL, NULL,
>> + &gate->hw, &clk_gate_ops, 0);
We'll probably need SET_RATE_PARENT here as well
>> + if (!IS_ERR(clk))
>> + of_clk_add_provider(node, of_clk_src_simple_get, clk);
>> +}
>> +CLK_OF_DECLARE(sun4i_mod1, "allwinner,sun4i-a10-mod1-clk", sun4i_mod1_clk_setup);
>
> Why are you not using clk-sunxi for this? It has pretty much
> everything in place to do so already.
If this were to have a rate component we could reuse the factors
infrastructure, but it doesn't, as it's just a gate and a mux.
Cheers,
Emilio
next prev parent reply other threads:[~2014-08-03 22:11 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-31 21:28 [PATCH 0/9] Audio clocks for sun[457]i, SoC revision detection Emilio López
2014-07-31 21:28 ` [PATCH 1/9] ARM: sunxi: introduce SoC identification support Emilio López
2014-08-03 12:40 ` Maxime Ripard
2014-08-03 21:45 ` Emilio López
2014-08-04 8:08 ` Lee Jones
2014-08-04 19:48 ` Maxime Ripard
2014-07-31 21:28 ` [PATCH 2/9] ARM: sunxi: quirk support Emilio López
2014-08-03 12:42 ` Maxime Ripard
2014-08-03 21:37 ` Emilio López
2014-08-04 19:32 ` Maxime Ripard
2014-07-31 21:28 ` [PATCH 3/9] ARM: sunxi: make sun6i SMP ops static Emilio López
2014-08-03 12:41 ` Maxime Ripard
2014-07-31 21:28 ` [PATCH 4/9] clk: sunxi: PLL2 support for sun4i, sun5i and sun7i Emilio López
2014-08-03 12:44 ` Maxime Ripard
2014-08-03 15:58 ` Chen-Yu Tsai
2014-08-03 18:48 ` Maxime Ripard
2014-08-03 22:02 ` Emilio López
2014-08-04 20:02 ` Maxime Ripard
2014-08-04 20:23 ` Emilio López
2014-08-07 11:23 ` Maxime Ripard
2014-08-06 13:51 ` jonsmirl at gmail.com
2014-08-06 15:20 ` jonsmirl at gmail.com
2014-08-08 0:03 ` jonsmirl at gmail.com
2014-07-31 21:28 ` [PATCH 5/9] clk: sunxi: codec clock support Emilio López
2014-07-31 21:28 ` [PATCH 6/9] clk: sunxi: mod1 " Emilio López
2014-08-03 12:47 ` Maxime Ripard
2014-08-03 22:11 ` Emilio López [this message]
2014-08-04 19:52 ` Maxime Ripard
2014-07-31 21:28 ` [PATCH 7/9] ARM: sunxi: dt: Add PLL2 support Emilio López
2014-07-31 21:46 ` jonsmirl at gmail.com
2014-08-03 12:50 ` Maxime Ripard
2014-08-03 15:55 ` Chen-Yu Tsai
2014-08-03 22:15 ` Emilio López
2014-08-04 19:53 ` Maxime Ripard
2014-07-31 21:28 ` [PATCH 8/9] ARM: sunxi: dt: Add codec clock support Emilio López
2014-07-31 21:28 ` [PATCH 9/9] ARM: sun7i: dt: Add mod1 clock nodes Emilio López
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53DEB398.8010109@elopez.com.ar \
--to=emilio@elopez$(echo .)com.ar \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox