Subject: [PATCH v3 0/4] Add eMMC and SD card support for rk3288-evb

From: [email-masked] (Jaehoon Chung)
Date: Thu, 07 Aug 2014 17:24:37 +0900

Hi, Doug.

Acked-by: Jaehoon Chung <[email-masked]>

On 08/07/2014 02:09 AM, Doug Anderson wrote:
> This series adds basic eMMC and SD card support for the rk3288-evb
> board based on Addy's posted dw_mmc patch from:
>   https://patchwork.kernel.org/patch/4653631/
> 
> The series is a little tricky because:
> * Jaehoon has some outstanding patches to remove the slot node.  Since
>   those haven't landed yet, I've posted my original patch with the
>   slot node and then some future patches that can land with Jaehoon's
>   patches.
> 
> So just to be explicit:
> - Patch #1 and #2 can land after Addy's patch lands.
> - Patch #3 and #4 can land after Jaehoon's patch lands, though there's
>   no huge hurry since Jaehoon's patch supports the old mode (it just
>   prints a warning).
> 
> Note that we don't have regulators specified yet (no regulator driver
> for rk808-based board).  We also don't yet support UHS modes or MMC
> DDR50 (which require regulator support plus dw_mmc driver support for
> tuning).  Those features can come later.
> 
> Changes in v3:
> - Removed DDR50 mode since it needs tuning, which isn't there yet.
> 
> Changes in v2:
> - New patchwork link for Addy's patch
> - Squashed in the DDR50 mode since Addy spun his patch.
> - Refer to the new title of Jaehoon's patch
> 
> Doug Anderson (4):
>   ARM: dts: Add emmc and sdmmc to the rk3288 device tree
>   ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards
>   ARM: dts: Take the mmc slot node out of rk3288-evb
>   ARM: dts: mmc slot node gone on rk3288 => no more address / size cells
> 
>  arch/arm/boot/dts/rk3288-evb.dtsi | 24 ++++++++++++++++++++++++
>  arch/arm/boot/dts/rk3288.dtsi     | 18 ++++++++++++++++++
>  2 files changed, 42 insertions(+)
>