From: caesar.wang@rock-chips•com (Caesar Wang)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v3 2/4] pwm: rockchip: Allow polarity invert on rk3288
Date: Wed, 20 Aug 2014 06:15:13 +0800 [thread overview]
Message-ID: <53F3CC71.8090005@rock-chips.com> (raw)
In-Reply-To: <1408464476-28316-3-git-send-email-dianders@chromium.org>
Hi Doug,
I reviewed it, the change is need.
Reviewed-on: https://github.com/rkchrome/kernel.git
Reviewed-by: Caesar Wang <caesar.wang@rock-chips•com>
? 2014?08?20? 00:07, Doug Anderson ??:
> The rk3288 has the ability to invert the polarity of the PWM. Let's
> enable that ability.
>
> To do this we increase the number of pwm_cells to 3 to allow using the
> PWM_POLARITY_INVERTED flag. Since the PWM driver on rk3288 is very
> new, I thought this was OK.
>
> Signed-off-by: Doug Anderson <dianders@chromium•org>
> ---
> Changes in v3:
> - Don't store a private copy of polarity.
> - Use true instead of 1.
> - Cleanup init order with "has_invert".
>
> Changes in v2: None
>
> .../devicetree/bindings/pwm/pwm-rockchip.txt | 4 +-
> drivers/pwm/pwm-rockchip.c | 48 ++++++++++++++++++----
> 2 files changed, 43 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt
> index d47d15a..b8be3d0 100644
> --- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt
> +++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt
> @@ -7,8 +7,8 @@ Required properties:
> "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC
> - reg: physical base address and length of the controller's registers
> - clocks: phandle and clock specifier of the PWM reference clock
> - - #pwm-cells: should be 2. See pwm.txt in this directory for a
> - description of the cell format.
> + - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.txt in this directory
> + for a description of the cell format.
>
> Example:
>
> diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
> index bdd8644..646aed2 100644
> --- a/drivers/pwm/pwm-rockchip.c
> +++ b/drivers/pwm/pwm-rockchip.c
> @@ -24,7 +24,9 @@
> #define PWM_ENABLE (1 << 0)
> #define PWM_CONTINUOUS (1 << 1)
> #define PWM_DUTY_POSITIVE (1 << 3)
> +#define PWM_DUTY_NEGATIVE (0 << 3)
> #define PWM_INACTIVE_NEGATIVE (0 << 4)
> +#define PWM_INACTIVE_POSITIVE (1 << 4)
> #define PWM_OUTPUT_LEFT (0 << 5)
> #define PWM_LP_DISABLE (0 << 8)
>
> @@ -45,8 +47,10 @@ struct rockchip_pwm_regs {
> struct rockchip_pwm_data {
> struct rockchip_pwm_regs regs;
> unsigned int prescaler;
> + bool has_invert;
>
> - void (*set_enable)(struct pwm_chip *chip, bool enable);
> + void (*set_enable)(struct pwm_chip *chip,
> + struct pwm_device *pwm, bool enable);
> };
>
> static inline struct rockchip_pwm_chip *to_rockchip_pwm_chip(struct pwm_chip *c)
> @@ -54,7 +58,8 @@ static inline struct rockchip_pwm_chip *to_rockchip_pwm_chip(struct pwm_chip *c)
> return container_of(c, struct rockchip_pwm_chip, chip);
> }
>
> -static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
> +static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip,
> + struct pwm_device *pwm, bool enable)
> {
> struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
> u32 enable_conf = PWM_CTRL_OUTPUT_EN | PWM_CTRL_TIMER_EN;
> @@ -70,14 +75,19 @@ static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
> writel_relaxed(val, pc->base + pc->data->regs.ctrl);
> }
>
> -static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
> +static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip,
> + struct pwm_device *pwm, bool enable)
> {
> struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
> u32 enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
> - PWM_CONTINUOUS | PWM_DUTY_POSITIVE |
> - PWM_INACTIVE_NEGATIVE;
> + PWM_CONTINUOUS;
> u32 val;
>
> + if (pwm->polarity == PWM_POLARITY_INVERSED)
> + enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE;
> + else
> + enable_conf |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE;
> +
> val = readl_relaxed(pc->base + pc->data->regs.ctrl);
>
> if (enable)
> @@ -124,6 +134,23 @@ static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> return 0;
> }
>
> +int rockchip_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
> + enum pwm_polarity polarity)
> +{
> + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
> +
> + if (!pc->data->has_invert)
> + return -ENOSYS;
> +
> + /*
> + * No action needed here because pwm->polarity will be set by the core
> + * and the core will only change polarity when the PWM is not enabled.
> + * We'll handle things in set_enable().
> + */
> +
> + return 0;
> +}
> +
> static int rockchip_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> {
> struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
> @@ -133,7 +160,7 @@ static int rockchip_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> if (ret)
> return ret;
>
> - pc->data->set_enable(chip, true);
> + pc->data->set_enable(chip, pwm, true);
>
> return 0;
> }
> @@ -142,13 +169,14 @@ static void rockchip_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> {
> struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
>
> - pc->data->set_enable(chip, false);
> + pc->data->set_enable(chip, pwm, false);
>
> clk_disable(pc->clk);
> }
>
> static const struct pwm_ops rockchip_pwm_ops = {
> .config = rockchip_pwm_config,
> + .set_polarity = rockchip_pwm_set_polarity,
> .enable = rockchip_pwm_enable,
> .disable = rockchip_pwm_disable,
> .owner = THIS_MODULE,
> @@ -173,6 +201,7 @@ static const struct rockchip_pwm_data pwm_data_v2 = {
> .ctrl = 0x0c,
> },
> .prescaler = 1,
> + .has_invert = true,
> .set_enable = rockchip_pwm_set_enable_v2,
> };
>
> @@ -184,6 +213,7 @@ static const struct rockchip_pwm_data pwm_data_vop = {
> .ctrl = 0x00,
> },
> .prescaler = 1,
> + .has_invert = true,
> .set_enable = rockchip_pwm_set_enable_v2,
> };
>
> @@ -230,6 +260,10 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
> pc->chip.ops = &rockchip_pwm_ops;
> pc->chip.base = -1;
> pc->chip.npwm = 1;
> + if (pc->data->has_invert) {
> + pc->chip.of_xlate = of_pwm_xlate_with_flags;
> + pc->chip.of_pwm_n_cells = 3;
> + }
>
> ret = pwmchip_add(&pc->chip);
> if (ret < 0) {
--
Best regards,
Caesar
next prev parent reply other threads:[~2014-08-19 22:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-19 16:07 [PATCH v3 0/4] PWM changes for rk3288-evb Doug Anderson
2014-08-19 16:07 ` [PATCH v3 1/4] ARM: rockchip: rk3288: Switch to use the proper PWM IP Doug Anderson
2014-08-19 16:07 ` [PATCH v3 2/4] pwm: rockchip: Allow polarity invert on rk3288 Doug Anderson
2014-08-19 22:15 ` Caesar Wang [this message]
2014-08-20 10:04 ` Thierry Reding
2014-08-20 18:54 ` Doug Anderson
2014-08-20 19:29 ` Dmitry Torokhov
2014-08-20 19:31 ` Doug Anderson
2014-08-21 6:40 ` Thierry Reding
2014-08-19 16:07 ` [PATCH v3 3/4] ARM: dts: Add main PWM info to rk3288 Doug Anderson
2014-08-19 16:07 ` [PATCH v3 4/4] ARM: dts: Enable PWM backlight on rk3288-EVB Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53F3CC71.8090005@rock-chips.com \
--to=caesar.wang@rock-chips$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox