Subject: [PATCHv2] thermal: exynos: Add support for TRIM_RELOAD feature at Exynos3250

From: [email-masked] (Chanwoo Choi)
Date: Wed, 20 Aug 2014 08:47:32 +0900

Dear Eduardo,

I'm so sorry. This patch has build break as following:
It is my mistake about missing 'or' operation when adding TMU_SUPPORT_TRIM_RELOAD.

+	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD\

I'll send new patch to fix it right now.

Best Regards,
Chanwoo Choi

On 08/19/2014 09:28 PM, edubezval at gmail.com wrote:
> Amit,
> 
> On Tue, Aug 19, 2014 at 8:07 AM, Chanwoo Choi <[email-masked]> wrote:
>> This patch add support for TRIM_RELOAD feature at Exynos3250. The TMU of
>> Exynos3250 has two TRIMINFO_CON register.
>>
>> Signed-off-by: Chanwoo Choi <[email-masked]>
>> Acked-by: Kyungmin Park <[email-masked]>
>> Cc: Zhang Rui <[email-masked]>
>> Cc: Eduardo Valentin <[email-masked]>
> 
> What do you think about this patch?
> 
>> ---
>> Changes from v1:
>> - Add missing 'TMU_SUPPORT_TRIM_RELOAD' features
>>
>>  drivers/thermal/samsung/exynos_tmu.c      |  7 +++++--
>>  drivers/thermal/samsung/exynos_tmu.h      |  5 +++--
>>  drivers/thermal/samsung/exynos_tmu_data.c | 11 +++++++++--
>>  drivers/thermal/samsung/exynos_tmu_data.h |  7 +++++--
>>  4 files changed, 22 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>> index acbff14..ed01606 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.c
>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>> @@ -164,8 +164,11 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>>                 }
>>         }
>>
>> -       if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
>> -               __raw_writel(1, data->base + reg->triminfo_ctrl);
>> +       if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
>> +               for (i = 0; i < pdata->triminfo_reload_count; i++)
>> +                       __raw_writel(pdata->triminfo_reload[i],
>> +                                       data->base + reg->triminfo_ctrl[i]);
>> +       }
>>
>>         if (pdata->cal_mode == HW_MODE)
>>                 goto skip_calib_data;
>> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
>> index 1b4a644..72cb54e 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.h
>> +++ b/drivers/thermal/samsung/exynos_tmu.h
>> @@ -151,8 +151,7 @@ struct exynos_tmu_registers {
>>         u32     triminfo_25_shift;
>>         u32     triminfo_85_shift;
>>
>> -       u32     triminfo_ctrl;
>> -       u32     triminfo_ctrl1;
>> +       u32     triminfo_ctrl[2];
>>         u32     triminfo_reload_shift;
>>
>>         u32     tmu_ctrl;
>> @@ -295,6 +294,8 @@ struct exynos_tmu_platform_data {
>>         u8 second_point_trim;
>>         u8 default_temp_offset;
>>         u8 test_mux;
>> +       u8 triminfo_reload[2];
>> +       u8 triminfo_reload_count;
>>
>>         enum calibration_type cal_type;
>>         enum calibration_mode cal_mode;
>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
>> index aa8e0de..b45aa90 100644
>> --- a/drivers/thermal/samsung/exynos_tmu_data.c
>> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
>> @@ -95,6 +95,8 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = {
>>         .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
>>         .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
>>         .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
>> +       .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1,
>> +       .triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2,
>>         .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
>>         .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
>>         .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
>> @@ -160,8 +162,11 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = {
>>                 .temp_level = 95, \
>>         }, \
>>         .freq_tab_count = 2, \
>> +       .triminfo_reload[0] = 0x1, \
>> +       .triminfo_reload[1] = 0x11, \
>> +       .triminfo_reload_count = 2, \
>>         .registers = &exynos3250_tmu_registers, \
>> -       .features = (TMU_SUPPORT_EMULATION | \
>> +       .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD\
>>                         TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
>>                         TMU_SUPPORT_EMUL_TIME)
>>  #endif
>> @@ -184,7 +189,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
>>         .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
>>         .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
>>         .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
>> -       .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
>> +       .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2,
>>         .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
>>         .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
>>         .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
>> @@ -252,6 +257,8 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
>>                 .temp_level = 95, \
>>         }, \
>>         .freq_tab_count = 2, \
>> +       .triminfo_reload[0] = 0x1, \
>> +       .triminfo_reload_count = 1, \
>>         .registers = &exynos4412_tmu_registers, \
>>         .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
>>                         TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
>> index f0979e5..e0536c3 100644
>> --- a/drivers/thermal/samsung/exynos_tmu_data.h
>> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
>> @@ -57,8 +57,11 @@
>>  #define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111
>>  #define EXYNOS4210_TMU_INTCLEAR_VAL    0x1111
>>
>> -/* Exynos5250 and Exynos4412 specific registers */
>> -#define EXYNOS_TMU_TRIMINFO_CON        0x14
>> +/* Exynos3250 specific registers */
>> +#define EXYNOS_TMU_TRIMINFO_CON1       0x10
>> +
>> +/* Exynos5250, Exynos4412 and Exynos3250 specific registers */
>> +#define EXYNOS_TMU_TRIMINFO_CON2       0x14
>>  #define EXYNOS_THD_TEMP_RISE           0x50
>>  #define EXYNOS_THD_TEMP_FALL           0x54
>>  #define EXYNOS_EMUL_CON                0x80
>> --
>> 1.8.0
>>
> 
> 
>