From: diana.craciun@freescale•com (Diana Craciun)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCHv2 2/6] ARM: dts: Add initial LS1021A QDS board dts support
Date: Thu, 21 Aug 2014 14:44:36 +0300 [thread overview]
Message-ID: <53F5DBA4.5010002@freescale.com> (raw)
In-Reply-To: <1407145148-29217-3-git-send-email-jingchang.lu@freescale.com>
On 08/04/2014 12:39 PM, Jingchang Lu wrote:
> From: Jingchang Lu <b35083@freescale•com>
>
> Signed-off-by: Alison Wang <alison.wang@freescale•com>
> Signed-off-by: Chao Fu <B44548@freescale•com>
> Signed-off-by: Jason Jin <Jason.Jin@freescale•com>
> Signed-off-by: Xiubo Li <Li.Xiubo@freescale•com>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale•com>
> Signed-off-by: Jaiprakash Singh <b44839@freescale•com>
> Signed-off-by: Jingchang Lu <jingchang.lu@freescale•com>
> ---
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/ls1021a-qds.dts | 349 ++++++++++++++++++++++++++++++++++++++
> 2 files changed, 351 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/ls1021a-qds.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 82f498b..af0d999 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -239,7 +239,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
> imx6sx-sdb.dtb \
> vf610-colibri.dtb \
> vf610-cosmic.dtb \
> - vf610-twr.dtb
> + vf610-twr.dtb \
> + ls1021a-qds.dtb
> dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
> imx23-olinuxino.dtb \
> imx23-stmp378x_devb.dtb \
> diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
> new file mode 100644
> index 0000000..d107edd
> --- /dev/null
> +++ b/arch/arm/boot/dts/ls1021a-qds.dts
> @@ -0,0 +1,349 @@
> +/*
> + * Copyright 2013-2014 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +/dts-v1/;
> +#include "ls1021a.dtsi"
> +
> +/ {
> + model = "LS1021A QDS Board";
> +
> + aliases {
> + enet0_rgmii_phy = &rgmii_phy1;
> + enet1_rgmii_phy = &rgmii_phy2;
> + enet2_rgmii_phy = &rgmii_phy3;
> + enet0_sgmii_phy = &sgmii_phy1c;
> + enet1_sgmii_phy = &sgmii_phy1d;
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg_3p3v: regulator at 0 {
> + compatible = "regulator-fixed";
> + reg = <0>;
> + regulator-name = "3P3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> +
> + sound {
> + compatible = "fsl,vf610-sgtl5000";
> + simple-audio-card,name = "FSL-VF610-TWR-BOARD";
> + simple-audio-card,routing =
> + "MIC_IN", "Microphone Jack",
> + "Microphone Jack", "Mic Bias",
> + "LINE_IN", "Line In Jack",
> + "Headphone Jack", "HP_OUT",
> + "Speaker Ext", "LINE_OUT";
> +
> + simple-audio-card,cpu = <&sai2>;
> +
> + simple-audio-card,codec = <&codec>;
> + };
> +
> + soc {
> + leds {
> + compatible = "pwm-leds";
> + led0 {
> + label = "led0";
> + pwms = <&pwm3 0 150000 0>;
> + max-brightness = <100>;
> + };
> + led1 {
> + label = "led1";
> + pwms = <&pwm3 1 150000 0>;
> + max-brightness = <100>;
> + };
> + led2 {
> + label = "led2";
> + pwms = <&pwm3 2 150000 0>;
> + max-brightness = <100>;
> + };
> + led3 {
> + label = "led3";
> + pwms = <&pwm3 3 150000 0>;
> + max-brightness = <100>;
> + };
> + led4 {
> + label = "led4";
> + pwms = <&pwm3 4 150000 0>;
> + max-brightness = <100>;
> + };
> + led5 {
> + label = "led5";
> + pwms = <&pwm3 5 150000 0>;
> + max-brightness = <100>;
> + };
> + led6 {
> + label = "led6";
> + pwms = <&pwm3 6 150000 0>;
> + max-brightness = <100>;
> + };
> + led7 {
> + label = "led7";
> + pwms = <&pwm3 7 150000 0>;
> + max-brightness = <100>;
> + };
> + };
> + };
> +};
> +
> +&dspi0 {
> + bus-num = <0>;
> + status = "okay";
> +
> + dspiflash: at45db021d at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
> + spi-max-frequency = <16000000>;
> + spi-cpol;
> + spi-cpha;
> + reg = <0>;
> + };
> +};
> +
> +&enet0 {
> + tbi-handle = <&tbi0>;
> + phy-handle = <&sgmii_phy1c>;
> + phy-connection-type = "sgmii";
> + status = "okay";
> +};
> +
> +&enet1 {
> + tbi-handle = <&tbi0>;
> + phy-handle = <&sgmii_phy1d>;
> + phy-connection-type = "sgmii";
> + status = "okay";
> +};
> +
> +&enet2 {
> + phy-handle = <&rgmii_phy3>;
> + phy-connection-type = "rgmii-id";
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> + pca9547 at 77 {
> + compatible = "philips,pca9547";
> + reg = <0x77>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c at 0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0>;
> +
> + rtc at 68 {
> + compatible = "dallas,ds3232";
> + reg = <0x68>;
> + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + i2c at 2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x2>;
> +
> + ina220 at 40 {
> + compatible = "ti,ina220";
> + reg = <0x40>;
> + shunt-resistor = <1000>;
> + };
> +
> + ina220 at 41 {
> + compatible = "ti,ina220";
> + reg = <0x41>;
> + shunt-resistor = <1000>;
> + };
> + };
> +
> + i2c at 3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x3>;
> +
> + eeprom at 56 {
> + compatible = "at24,24c512";
> + reg = <0x56>;
> + };
> +
> + eeprom at 57 {
> + compatible = "at24,24c512";
> + reg = <0x57>;
> + };
> +
> + adt7461a at 4c {
> + compatible = "adt7461a";
> + reg = <0x4c>;
> + };
> + };
> +
> + i2c at 4 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x4>;
> +
> + codec: sgtl5000 at 0a {
> + compatible = "fsl,sgtl5000";
> + reg = <0x0a>;
> + VDDA-supply = <®_3p3v>;
> + VDDIO-supply = <®_3p3v>;
> + clocks = <&platform_clk 1>;
> + };
> + };
> + };
> +};
> +
> +&ifc {
> + status = "okay";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + /* NOR, NAND Flashes and FPGA on board */
> + ranges = <0x0 0x0 0x0 0x60000000 0x08000000
> + 0x2 0x0 0x0 0x7e800000 0x00010000
> + 0x3 0x0 0x0 0x7fb00000 0x00000100>;
> +
> + nor at 0,0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "cfi-flash";
> + reg = <0x0 0x0 0x8000000>;
> + bank-width = <2>;
> + device-width = <1>;
> + };
> +
> + nand at 2,0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,ifc-nand";
> + reg = <0x2 0x0 0x10000>;
> +
> + partition at 0 {
> + /* This location must not be altered */
> + /* 1MB for u-boot Bootloader Image */
> + reg = <0x0 0x00100000>;
> + label = "NAND U-Boot Image";
> + read-only;
> + };
> +
> + partition at 100000 {
> + /* 1MB for DTB Image */
> + reg = <0x00100000 0x00100000>;
> + label = "NAND DTB Image";
> + };
> +
> + partition at 200000 {
> + /* 10MB for Linux Kernel Image */
> + reg = <0x00200000 0x00a00000>;
> + label = "NAND Linux Kernel Image";
> + };
> +
> + partition at c00000 {
> + /* 500MB for Root file System Image */
> + reg = <0x00c00000 0x1f400000>;
> + label = "NAND Compressed RFS Image";
> + };
I do not think that partitions should be put in the dts file. They are a
convention, not a description of the hardware.
Diana
next prev parent reply other threads:[~2014-08-21 11:44 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-04 9:39 [PATCHv2 0/6] ARM: imx: Add Freescale LS1021A SoC and board support Jingchang Lu
2014-08-04 9:39 ` [PATCHv2 1/6] ARM: dts: Add SoC level device tree support for LS1021A Jingchang Lu
2014-08-04 9:39 ` [PATCHv2 2/6] ARM: dts: Add initial LS1021A QDS board dts support Jingchang Lu
2014-08-21 11:44 ` Diana Craciun [this message]
2014-08-04 9:39 ` [PATCHv2 3/6] ARM: dts: Add initial LS1021A TWR " Jingchang Lu
2014-08-04 9:39 ` [PATCHv2 4/6] dt-bindings: arm: add Freescale LS1021A SoC device tree binding Jingchang Lu
2014-08-20 12:34 ` Diana Craciun
2014-08-22 10:21 ` Jingchang Lu
2014-08-04 9:39 ` [PATCHv2 5/6] ARM: imx: Add initial support for Freescale LS1021A Jingchang Lu
2014-08-04 9:39 ` [PATCHv2 6/6] ARM: imx: Add Freescale LS1021A SMP support Jingchang Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53F5DBA4.5010002@freescale.com \
--to=diana.craciun@freescale$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox