Subject: [PATCH] ARM: dts: omap5.dtsi: add DSS RFBI node

From: [email-masked] (Nishanth Menon)
Date: Thu, 4 Sep 2014 08:44:48 -0500

$subject: ARM: dts: OMAP5: Add DSS RFBI node

On 09/04/2014 01:28 AM, Tomi Valkeinen wrote:
> The RFBI node for OMAP DSS was left out when adding the rest of the DSS
> nodes, because it was not clear how to set up the clocks for the RFBI.
> 
> However, it seems that if there is a HWMOD for a device, we also need a
> DT node for it. Otherwise, at boot, we get:
> 
> WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2542 _init+0x464/0x4e0()
> omap_hwmod: dss_rfbi: doesn't have mpu register target base
> 
> Now that v3.17-rc3 contains a fix
> (8fd46439e1f5a7f86d76a08733459b74debd9468) for the L3 ICLK required by
> the RFBI, let's add the RFBI node to get rid of the warning.
The usual style is to use the following style:
Commit 8fd46439e1f5 ("ARM: dts: omap54xx-clocks: Fix the l3 and l4
clock rates")

> 
> Signed-off-by: Tomi Valkeinen <[email-masked]>
> ---
>  arch/arm/boot/dts/omap5.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index fc8df1739f39..1e6ff61a7f12 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -945,6 +945,15 @@
>  				clock-names = "fck";
>  			};
>  
> +			rfbi: encoder at 58002000  {
> +				compatible = "ti,omap5-rfbi";
> +				reg = <0x58002000 0x100>;
> +				status = "disabled";
> +				ti,hwmods = "dss_rfbi";
> +				clocks = <&dss_dss_clk>, <&l3_iclk_div>;
> +				clock-names = "fck", "ick";
> +			};
> +
>  			dsi1: encoder at 58004000 {
>  				compatible = "ti,omap5-dsi";
>  				reg = <0x58004000 0x200>,
> 

before-omap5-evm: http://paste.ubuntu.org.cn/1477659

after-omap5-evm:  http://paste.ubuntu.org.cn/1477658

So, yep, no more warning.

-- 
Regards,
Nishanth Menon