Subject: [RESEND PATCH] iio: adc: at91: don't use the last converted data register

From: [email-masked] (Hartmut Knaack)
Date: Sat, 06 Sep 2014 20:37:36 +0200

Ludovic Desroches schrieb:
> If touchscreen mode is enabled and a conversion is requested on another
> channel, the result in the last converted data register can be a
> touchscreen relative value. Starting a conversion involves to do a
> conversion for all active channel. It starts with ADC channels and ends
> with touchscreen channels. Then if ADC_LCD register is not read quickly,
> its content may be a touchscreen conversion.
> To remove this temporal constraint, the conversion value is taken from
> the channel data register.
I would recommend to drop eoc_mask and use GENMASK instead. Also, using BIT(chan->channel) would be a good idea.
> Signed-off-by: Ludovic Desroches <[email-masked]>
> ---
>
> Sorry for the noise, there was a typo in the CC list.
>
>  drivers/iio/adc/at91_adc.c |   14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
> index 3b5bacd..dde22cb 100644
> --- a/drivers/iio/adc/at91_adc.c
> +++ b/drivers/iio/adc/at91_adc.c
> @@ -196,6 +196,7 @@ struct at91_adc_state {
>  	bool			done;
>  	int			irq;
>  	u16			last_value;
> +	int			chnb;
>  	struct mutex		lock;
>  	u8			num_channels;
>  	void __iomem		*reg_base;
> @@ -274,7 +275,7 @@ void handle_adc_eoc_trigger(int irq, struct iio_dev *idev)
>  		disable_irq_nosync(irq);
>  		iio_trigger_poll(idev->trig, iio_get_time_ns());
>  	} else {
> -		st->last_value = at91_adc_readl(st, AT91_ADC_LCDR);
> +		st->last_value = at91_adc_readl(st, AT91_ADC_CHAN(st, st->chnb));
>  		st->done = true;
>  		wake_up_interruptible(&st->wq_data_avail);
>  	}
> @@ -348,10 +349,11 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private)
>  	struct iio_dev *idev = private;
>  	struct at91_adc_state *st = iio_priv(idev);
>  	u32 status = at91_adc_readl(st, st->registers->status_register);
> +	const u32 eoc_mask = (1 << st->num_channels) - 1;
>  	unsigned int reg;
>  
>  	status &= at91_adc_readl(st, AT91_ADC_IMR);
> -	if (status & st->registers->drdy_mask)
> +	if (status & eoc_mask)
>  		handle_adc_eoc_trigger(irq, idev);
>  
>  	if (status & AT91RL_ADC_IER_PEN) {
> @@ -413,12 +415,13 @@ static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private)
>  	struct iio_dev *idev = private;
>  	struct at91_adc_state *st = iio_priv(idev);
>  	u32 status = at91_adc_readl(st, st->registers->status_register);
> +	const u32 eoc_mask = (1 << st->num_channels) - 1;
>  	const uint32_t ts_data_irq_mask =
>  		AT91_ADC_IER_XRDY |
>  		AT91_ADC_IER_YRDY |
>  		AT91_ADC_IER_PRDY;
>  
> -	if (status & st->registers->drdy_mask)
> +	if (status & eoc_mask)
>  		handle_adc_eoc_trigger(irq, idev);
>  
>  	if (status & AT91_ADC_IER_PEN) {
> @@ -689,9 +692,10 @@ static int at91_adc_read_raw(struct iio_dev *idev,
>  	case IIO_CHAN_INFO_RAW:
>  		mutex_lock(&st->lock);
>  
> +		st->chnb = chan->channel;
>  		at91_adc_writel(st, AT91_ADC_CHER,
>  				AT91_ADC_CH(chan->channel));
> -		at91_adc_writel(st, AT91_ADC_IER, st->registers->drdy_mask);
> +		at91_adc_writel(st, AT91_ADC_IER, 1 << chan->channel);
>  		at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_START);
>  
>  		ret = wait_event_interruptible_timeout(st->wq_data_avail,
> @@ -708,7 +712,7 @@ static int at91_adc_read_raw(struct iio_dev *idev,
>  
>  		at91_adc_writel(st, AT91_ADC_CHDR,
>  				AT91_ADC_CH(chan->channel));
> -		at91_adc_writel(st, AT91_ADC_IDR, st->registers->drdy_mask);
> +		at91_adc_writel(st, AT91_ADC_IDR, 1 << chan->channel);
>  
>  		st->last_value = 0;
>  		st->done = false;