Subject: [PATCH v2 2/3] ARM: at91/dt: at91: use new pinctrl id for sama5

From: [email-masked] (Nicolas Ferre)
Date: Mon, 8 Sep 2014 10:07:54 +0200

On 24/08/2014 05:12, Marek Roszko :
> This switches the SAMA5D3 to use the new atmel,sama5d3-pinctrl id that was
> added with the drive strength options patch.
> 
> Signed-off-by: Marek Roszko <[email-masked]>
> ---
>  arch/arm/boot/dts/sama5d3.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index 45013b8..7db0e85 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@ -428,7 +428,7 @@
>  			pinctrl at fffff200 {
>  				#address-cells = <1>;
>  				#size-cells = <1>;
> -				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
> +				compatible = "atmel,sama5d3-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";

I'd better keep the compatibility with at91sam9x5, like it
was before your patch: that will remove the dependency on
the pinctrl series: what about:

+				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";

>  				ranges = <0xfffff200 0xfffff200 0xa00>;
>  				atmel,mux-mask = <
>  					/*   A          B          C  */
> 

-- 
Nicolas Ferre