From: kishon@ti•com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v3 1/4] phy: phy-stih41x-usb: Add usb phy support for STiH41x SoCs.
Date: Mon, 8 Sep 2014 15:09:10 +0530 [thread overview]
Message-ID: <540D793E.9050301@ti.com> (raw)
In-Reply-To: <1410168638-11072-2-git-send-email-peter.griffin@linaro.org>
Hi,
On Monday 08 September 2014 03:00 PM, Peter Griffin wrote:
> This driver adds support for USB (1.1 and 2.0) phy for STiH415 and
> STiH416 System-On-Chips from STMicroelectronics.
>
> Signed-off-by: Maxime Coquelin <maxime.coquelin@st•com>
> Signed-off-by: Peter Griffin <peter.griffin@linaro•org>
> ---
> drivers/phy/Kconfig | 8 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-stih41x-usb.c | 192 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 201 insertions(+)
> create mode 100644 drivers/phy/phy-stih41x-usb.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 0dd7427..26f8a86 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -230,4 +230,12 @@ config PHY_XGENE
> help
> This option enables support for APM X-Gene SoC multi-purpose PHY.
>
> +config PHY_STIH41X_USB
> + tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
> + depends on ARCH_STI
> + select GENERIC_PHY
> + help
> + Enable this to support the USB transceiver that is part of
> + STMicroelectronics STiH41x SoC series.
> +
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 95c69ed..d02f365 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -28,3 +28,4 @@ obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
> obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
> obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
> obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
> +obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
> diff --git a/drivers/phy/phy-stih41x-usb.c b/drivers/phy/phy-stih41x-usb.c
> new file mode 100644
> index 0000000..7d0a5d4
> --- /dev/null
> +++ b/drivers/phy/phy-stih41x-usb.c
> @@ -0,0 +1,192 @@
.
.
<skip>
.
.
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (IS_ERR(phy_provider))
> + return PTR_ERR(phy_provider);
> +
> + phy = devm_phy_create(dev, NULL, &stih41x_usb_phy_ops, NULL);
> +
> + if (IS_ERR(phy)) {
> + dev_err(dev, "failed to create Display Port PHY\n");
> + return PTR_ERR(phy);
> + }
> +
> + phy_dev->dev = dev;
> +
> + phy_set_drvdata(phy, phy_dev);
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (IS_ERR(phy_provider))
> + return PTR_ERR(phy_provider);
registering phy provider multiple times..
Thanks
Kishon
next prev parent reply other threads:[~2014-09-08 9:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-08 9:30 [PATCH v3 0/4] Add usb phy support for STiH41x SoCs Peter Griffin
2014-09-08 9:30 ` [PATCH v3 1/4] phy: phy-stih41x-usb: " Peter Griffin
2014-09-08 9:39 ` Kishon Vijay Abraham I [this message]
2014-09-08 10:31 ` Peter Griffin
2014-09-08 9:30 ` [PATCH v3 2/4] phy: phy-stih41x-usb: Add dt documentation for USB phy on STiH415/6 Peter Griffin
2014-09-08 9:30 ` [PATCH v3 3/4] MAINTAINERS: Add phy-stih41x-usb.c to ARCH/STI architecture Peter Griffin
2014-09-08 9:30 ` [PATCH v3 4/4] ARM: multi_v7_defconfig: Enable stih41x usb phy driver Peter Griffin
2014-09-08 9:41 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=540D793E.9050301@ti.com \
--to=kishon@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox