From: sbranden@broadcom•com (Scott Branden)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC
Date: Wed, 8 Oct 2014 09:34:00 -0700 [thread overview]
Message-ID: <54356778.4090101@broadcom.com> (raw)
In-Reply-To: <CAL_JsqKD6F5xcUQx8T++uDK2zaqTneRwU+2yR7RMj==ArwcLcA@mail.gmail.com>
Thanks for comments - inline.
On 14-10-08 06:10 AM, Rob Herring wrote:
> On Wed, Oct 8, 2014 at 12:27 AM, Scott Branden <sbranden@broadcom•com> wrote:
>> From: Jonathan Richardson <jonathar@broadcom•com>
>>
>> Adds initial support for the Cygnus SoC based on Broadcom?s iProc series.
>>
>> Reviewed-by: Ray Jui <rjui@broadcom•com>
>> Reviewed-by: Desmond Liu <desmondl@broadcom•com>
>> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom•com>
>> Tested-by: Jonathan Richardson <jonathar@broadcom•com>
>> Signed-off-by: Scott Branden <sbranden@broadcom•com>
>> ---
>> arch/arm/mach-bcm/Kconfig | 31 ++++++++
>> arch/arm/mach-bcm/Makefile | 3 +
>> arch/arm/mach-bcm/bcm_cygnus.c | 166 ++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 200 insertions(+)
>> create mode 100644 arch/arm/mach-bcm/bcm_cygnus.c
>>
>> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
>> index fc93800..2dd3f78 100644
>> --- a/arch/arm/mach-bcm/Kconfig
>> +++ b/arch/arm/mach-bcm/Kconfig
>> @@ -5,6 +5,37 @@ menuconfig ARCH_BCM
>>
>> if ARCH_BCM
>>
>> +config ARCH_BCM_IPROC
>> + bool "Broadcom ARMv7 iProc boards" if ARCH_MULTI_V7
>> + select ARM_GIC
>> + select CACHE_L2X0
>> + select HAVE_ARM_TWD if LOCAL_TIMERS
>
> LOCAL_TIMERS does not exist anymore.
Will change to if SMP so it will work for other iproc chips that have
SMP going forward.
>
>> + select HAVE_CLK
>
> Selected already by multi-platform.
>
>> + select CLKSRC_OF
>> + select CLKSRC_MMIO
>
> These should be selected by the timers that need these rather than the platform.
>
OK
>> + select GENERIC_CLOCKEVENTS
>
> Selected already by multi-platform.
>
>> + select ARM_GLOBAL_TIMER
>> + select ARCH_REQUIRE_GPIOLIB
>> + select ARM_AMBA
>> + select PINCTRL
>> + select DEBUG_UART_8250
>
> This entry should not be a select. It will break multi-platform.
Yes, this select will be removed from here in next version and moved to
kconfig.debug as other platforms do.
>
> Sort the select entries alphabetically.
>
>> + help
>> + This enables support for systems based on Broadcom IPROC architected SoCs.
>> + The IPROC complex contains one or more ARM CPUs along with common
>> + core periperals. Application specific SoCs are created by adding a
>> + uArchitecture containing peripherals outside of the IPROC complex.
>> + Currently supported SoCs are Cygnus.
>> +
>> +menu "iProc SoC based Machine types"
>> + depends on ARCH_BCM_IPROC
>> +
>> + config ARCH_BCM_CYGNUS
>> + bool "Support Broadcom Cygnus board"
>> + select USB_ARCH_HAS_EHCI if USB_SUPPORT
>> + help
>> + Support for Broadcom Cygnus SoC.
>> +endmenu
>> +
>> config ARCH_BCM_MOBILE
>> bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
>> select ARCH_REQUIRE_GPIOLIB
>> diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
>> index b19a396..46e092a 100644
>> --- a/arch/arm/mach-bcm/Makefile
>> +++ b/arch/arm/mach-bcm/Makefile
>> @@ -10,6 +10,9 @@
>> # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> # GNU General Public License for more details.
>>
>> +# Cygnus
>> +obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
>> +
>> # BCM281XX
>> obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
>>
>> diff --git a/arch/arm/mach-bcm/bcm_cygnus.c b/arch/arm/mach-bcm/bcm_cygnus.c
>> new file mode 100644
>> index 0000000..8e430ed
>> --- /dev/null
>> +++ b/arch/arm/mach-bcm/bcm_cygnus.c
>> @@ -0,0 +1,166 @@
>> +/*
>> + * Copyright 2014 Broadcom Corporation. All rights reserved.
>> + *
>> + * Unless you and Broadcom execute a separate written software license
>> + * agreement governing use of this software, this software is licensed to you
>> + * under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation version 2.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/of_address.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/clocksource.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/delay.h>
>> +#include <asm/mach/arch.h>
>> +#include <asm/mach/map.h>
>> +#include <asm/proc-fns.h>
>> +#include <asm/hardware/cache-l2x0.h>
>> +
>> +#define CRMU_MAIL_BOX1 0x03024028
>> +#define CRMU_SOFT_RESET_CMD 0xFFFFFFFF
>> +
>> +/* CRU_RESET register */
>> +static void * __iomem crmu_mail_box1_reg;
>> +
>> +#ifdef CONFIG_NEON
>> +
>> +#define CRU_BASE 0x1800e000
>> +#define CRU_SIZE 0x34
>> +#define CRU_CONTROL_OFFSET 0x0
>> +#define CRU_PWRDWN_EN_OFFSET 0x4
>> +#define CRU_PWRDWN_STATUS_OFFSET 0x8
>> +#define CRU_NEON0_HW_RESET 6
>> +#define CRU_CLAMP_ON_NEON0 20
>> +#define CRU_PWRONIN_NEON0 21
>> +#define CRU_PWRONOUT_NEON0 21
>> +#define CRU_PWROKIN_NEON0 22
>> +#define CRU_PWROKOUT_NEON0 22
>> +#define CRU_STATUS_DELAY_NS 500
>> +#define CRU_MAX_RETRY_COUNT 10
>> +#define CRU_RETRY_INTVL_US 1
>> +
>> +/* Power up the NEON/VFPv3 block. */
>> +static void bcm_cygnus_powerup_neon(void)
>> +{
>> + void * __iomem cru_base = ioremap(CRU_BASE, CRU_SIZE);
>> + u32 reg, i;
>> +
>> + if (WARN_ON(!cru_base))
>> + return;
>> +
>> + /* De-assert the neon hardware block reset */
>> + reg = readl(cru_base + CRU_CONTROL_OFFSET);
>> + reg &= ~(1 << CRU_NEON0_HW_RESET);
>> + writel(reg, cru_base + CRU_CONTROL_OFFSET);
>> +
>> + /* Assert the power ON register bit */
>> + reg = readl(cru_base + CRU_PWRDWN_EN_OFFSET);
>> + reg |= (1 << CRU_PWRONIN_NEON0);
>> + writel(reg, cru_base + CRU_PWRDWN_EN_OFFSET);
>> +
>> + /*
>> + * Wait up to 10 usec in 1 usec increments for the
>> + * status register to acknowledge the power ON assert
>> + */
>> + for (i = 0; i < CRU_MAX_RETRY_COUNT; i++) {
>> + reg = readl(cru_base + CRU_PWRDWN_STATUS_OFFSET);
>> + if (reg & CRU_PWRONOUT_NEON0)
>> + break;
>> +
>> + udelay(CRU_RETRY_INTVL_US);
>> + }
>> +
>> + if (WARN_ON(i == CRU_MAX_RETRY_COUNT))
>> + goto neon_unmap;
>> +
>> + /* Wait 0.5 usec = 500 nsec */
>> + ndelay(CRU_STATUS_DELAY_NS);
>> +
>> + /* Assert the power OK register bit */
>> + reg = readl(cru_base + CRU_PWRDWN_EN_OFFSET);
>> + reg |= (1 << CRU_PWROKIN_NEON0);
>> + writel(reg, cru_base + CRU_PWRDWN_EN_OFFSET);
>> +
>> + /*
>> + * Wait up to 10 usec in 1 usec increments for the
>> + * status register to acknowledge the power OK assert
>> + */
>> + for (i = 0; i < CRU_MAX_RETRY_COUNT; i++) {
>> + reg = readl(cru_base + CRU_PWRDWN_STATUS_OFFSET);
>> + if (reg & CRU_PWROKOUT_NEON0)
>> + break;
>> +
>> + udelay(CRU_RETRY_INTVL_US);
>> + }
>> +
>> + if (WARN_ON(i == CRU_MAX_RETRY_COUNT))
>> + goto neon_unmap;
>> +
>> + /* Wait 0.5 usec = 500 nsec */
>> + ndelay(CRU_STATUS_DELAY_NS);
>> +
>> + /* Set the logic clamp for the neon block */
>> + reg = readl(cru_base + CRU_PWRDWN_EN_OFFSET);
>> + reg &= ~(1 << CRU_CLAMP_ON_NEON0);
>> + writel(reg, cru_base + CRU_PWRDWN_EN_OFFSET);
>> +
>> + /* Wait 0.5 usec = 500 nsec */
>> + ndelay(CRU_STATUS_DELAY_NS);
>> +
>> + /* Reset the neon hardware block */
>> + reg = readl(cru_base + CRU_CONTROL_OFFSET);
>> + reg |= (1 << CRU_NEON0_HW_RESET);
>> + writel(reg, cru_base + CRU_CONTROL_OFFSET);
>> +
>> +neon_unmap:
>> + iounmap(cru_base);
>> +}
>> +#endif /* CONFIG_NEON */
>
> Is this a single core chip? If not, it seems like all this would
> change when you add SMP support.
Cygnus is a single core chip. There are other chips in the IPROC family
that are multi-core. But they are not part of the Cygnus
sub-architecture and would have different ways of powering up. These
will be added in a different patch in the future.
>
> Rob
>
next prev parent reply other threads:[~2014-10-08 16:34 UTC|newest]
Thread overview: 185+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Scott Branden <sbranden@broadcom.com>
2014-10-08 5:26 ` [PATCH V3 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-08 5:27 ` [PATCH 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-08 7:54 ` Arnd Bergmann
2014-10-08 12:27 ` Scott Branden
2014-10-08 13:28 ` Arnd Bergmann
2014-10-08 16:27 ` Scott Branden
2014-10-08 18:12 ` Arnd Bergmann
2014-10-08 18:45 ` Scott Branden
2014-10-08 22:16 ` Scott Branden
2014-10-09 7:32 ` Arnd Bergmann
2014-10-08 8:11 ` Russell King - ARM Linux
2014-10-08 11:17 ` Scott Branden
2014-10-08 11:41 ` Russell King - ARM Linux
2014-10-08 13:10 ` Rob Herring
2014-10-08 16:34 ` Scott Branden [this message]
2014-10-08 5:27 ` [PATCH 2/6] clk: Clock driver " Scott Branden
2014-10-08 5:27 ` [PATCH 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver Scott Branden
2014-10-08 7:57 ` Arnd Bergmann
2014-10-08 10:58 ` Scott Branden
2014-10-08 13:35 ` Arnd Bergmann
2014-10-08 5:27 ` [PATCH 4/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-08 7:58 ` Arnd Bergmann
2014-10-08 11:01 ` Scott Branden
2014-10-08 5:27 ` [PATCH 5/6] ARM: dts: Enable " Scott Branden
2014-10-08 5:27 ` [PATCH 6/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Scott Branden
2014-10-09 22:44 ` [PATCH V4 0/7] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-09 22:44 ` [PATCH V4 1/7] ARM: cygnus: Initial " Scott Branden
2014-10-10 9:50 ` Arnd Bergmann
2014-10-10 19:08 ` Scott Branden
2014-10-09 22:44 ` [PATCH V4 2/7] clk: Clock driver " Scott Branden
2014-10-09 22:44 ` [PATCH V4 3/7] dt-bindings: Document Broadcom Cygnus SoC and clock driver Scott Branden
2014-10-09 22:44 ` [PATCH V4 4/7] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-09 22:44 ` [PATCH V4 5/7] ARM: dts: Enable " Scott Branden
2014-10-10 10:08 ` Arnd Bergmann
2014-10-10 19:11 ` Scott Branden
2014-10-09 22:44 ` [PATCH V4 6/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Scott Branden
2014-10-09 23:00 ` Joe Perches
2014-10-09 23:18 ` Scott Branden
2014-10-09 22:44 ` [PATCH V4 7/7] ARM: multi_v7_defconfig: Enable ARCH_BCM_CYGNUS config Scott Branden
2014-10-10 9:59 ` Arnd Bergmann
2014-10-10 19:12 ` Scott Branden
2014-10-15 2:58 ` [PATCH v5 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-15 2:58 ` [PATCH v5 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-20 19:55 ` Arnd Bergmann
2014-10-20 22:59 ` Scott Branden
2014-10-21 5:48 ` Arnd Bergmann
2014-10-22 0:11 ` Scott Branden
2014-10-22 8:22 ` Arnd Bergmann
2014-10-22 17:12 ` Scott Branden
2014-10-15 2:58 ` [PATCH v5 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-15 2:58 ` [PATCH v5 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-15 2:58 ` [PATCH v5 4/6] ARM: dts: Enable " Scott Branden
2014-10-15 2:58 ` [PATCH v5 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-15 2:58 ` [PATCH v5 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-22 2:09 ` [PATCH v6 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-22 2:09 ` [PATCH v6 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-22 2:09 ` [PATCH v6 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-22 2:09 ` [PATCH v6 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-22 2:09 ` [PATCH v6 4/6] ARM: dts: Enable " Scott Branden
2014-10-22 2:09 ` [PATCH v6 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-22 2:09 ` [PATCH v6 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-22 20:57 ` [PATCH v7 0/7] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-22 20:57 ` [PATCH v7 1/7] ARM: cygnus: Initial " Scott Branden
2014-10-22 20:57 ` [PATCH v7 2/7] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-22 20:57 ` [PATCH v7 3/7] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-22 20:57 ` [PATCH v7 4/7] ARM: dts: Enable " Scott Branden
2014-10-28 16:10 ` Arnd Bergmann
2014-10-28 19:41 ` Scott Branden
2014-10-22 20:57 ` [PATCH v7 5/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-22 20:57 ` [PATCH v7 6/7] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-22 20:57 ` [PATCH v7 7/7] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 19:53 ` [PATCH v8 0/8] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-28 19:53 ` [PATCH v8 1/8] ARM: cygnus: Initial " Scott Branden
2014-10-28 19:53 ` [PATCH v8 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-28 19:53 ` [PATCH v8 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-28 19:53 ` [PATCH v8 4/8] ARM: dts: Enable " Scott Branden
2014-11-09 0:22 ` Olof Johansson
2014-11-09 6:13 ` Scott Branden
2014-11-09 6:49 ` Olof Johansson
2014-11-09 17:23 ` Greg Kroah-Hartman
2014-11-09 20:38 ` Arnd Bergmann
2014-11-10 5:17 ` Scott Branden
2014-11-10 8:11 ` Arnd Bergmann
2014-11-10 18:28 ` Scott Branden
2014-10-28 19:53 ` [PATCH v8 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-28 19:53 ` [PATCH v8 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-28 19:53 ` [PATCH v8 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 19:53 ` [PATCH v8 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-10-28 20:01 ` Arnd Bergmann
2014-10-28 20:06 ` Scott Branden
2014-10-28 20:13 ` Arnd Bergmann
2014-10-28 23:15 ` [PATCH v9 0/8] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-28 23:15 ` [PATCH v9 1/8] ARM: cygnus: Initial " Scott Branden
2014-10-28 23:15 ` [PATCH v9 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-11-20 1:05 ` Mike Turquette
2014-10-28 23:15 ` [PATCH v9 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-28 23:15 ` [PATCH v9 4/8] ARM: dts: Enable " Scott Branden
2014-11-10 10:50 ` Paul Bolle
2014-11-10 18:35 ` Olof Johansson
2014-11-10 19:23 ` Paul Bolle
2014-10-28 23:15 ` [PATCH v9 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-28 23:15 ` [PATCH v9 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-28 23:15 ` [PATCH v9 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 23:15 ` [PATCH v9 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-11-10 5:55 ` [PATCH 1/2] ARM: multi_v7_defconfig: remove one level of menu from Kconfig Scott Branden
2014-11-10 5:55 ` [PATCH 2/2] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2015-02-10 0:06 ` [PATCH 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-02-10 0:06 ` [PATCH 1/4] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2015-02-10 0:06 ` [PATCH 2/4] mmc: sdhci: do not set AUTO_CMD12 for multi-block CMD53 Scott Branden
2015-02-10 0:06 ` [PATCH 3/4] mmc: sdhci-iproc: add IPROC SDHCI driver Scott Branden
2015-02-10 0:06 ` [PATCH 4/4] mmc: sdhci-iproc: add device tree bindings Scott Branden
2015-03-02 23:50 ` Florian Fainelli
2015-03-04 23:14 ` Scott Branden
2015-02-26 17:28 ` [PATCH 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-02-10 0:07 ` [PATCH 0/2] Add support for Broadcom RNG200 Scott Branden
2015-02-10 0:07 ` [PATCH 1/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-02-10 0:27 ` Joe Perches
2015-02-14 16:36 ` Scott Branden
2015-02-14 17:02 ` Scott Branden
2015-02-10 0:07 ` [PATCH 2/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-02-10 0:07 ` [PATCH 0/2] Add support for Broadcom keypad controller Scott Branden
2015-02-10 0:07 ` [PATCH 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-10 0:51 ` Dmitry Torokhov
2015-02-14 16:49 ` Scott Branden
2015-02-16 5:17 ` Dmitry Torokhov
2015-02-23 17:49 ` Dmitry Torokhov
2015-02-26 16:13 ` Scott Branden
2015-02-10 0:07 ` [PATCH 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-10 1:02 ` Dmitry Torokhov
2015-02-14 17:12 ` Scott Branden
2015-02-25 18:16 ` [PATCH v2 0/2] Add support for Broadcom RNG200 Scott Branden
2015-02-25 18:16 ` [PATCH v2 1/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-03-02 23:47 ` Florian Fainelli
2015-02-25 18:16 ` [PATCH v2 2/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-02-25 18:43 ` Dmitry Torokhov
2015-03-03 0:50 ` Scott Branden
2015-02-25 19:17 ` Arnd Bergmann
2015-02-26 19:37 ` Scott Branden
2015-02-26 20:15 ` Arnd Bergmann
2015-02-26 22:26 ` Scott Branden
2015-02-27 9:14 ` Arnd Bergmann
2015-02-28 16:01 ` Scott Branden
2015-02-28 19:31 ` Arnd Bergmann
2015-03-02 19:41 ` Scott Branden
2015-03-02 10:23 ` [PATCH v2 0/2] Add support for Broadcom RNG200 Herbert Xu
2015-02-26 16:08 ` [PATCH v2 0/2] Add support for Broadcom keypad controller Scott Branden
2015-02-26 16:08 ` [PATCH v2 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-27 23:39 ` Dmitry Torokhov
2015-02-28 15:41 ` Scott Branden
2015-02-26 16:08 ` [PATCH v2 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-27 23:44 ` Dmitry Torokhov
2015-02-28 15:52 ` Scott Branden
2015-02-28 14:16 ` Paul Bolle
2015-02-28 15:36 ` Scott Branden
2015-02-28 16:03 ` [PATCH v3 0/2] Add support for " Scott Branden
2015-02-28 16:03 ` [PATCH v3 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-28 16:03 ` [PATCH v3 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-28 16:35 ` [PATCH v4 0/2] Add support for " Scott Branden
2015-02-28 16:35 ` [PATCH v4 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-03-03 0:04 ` Dmitry Torokhov
2015-02-28 16:35 ` [PATCH v4 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-28 22:10 ` Dmitry Torokhov
2015-02-28 22:15 ` Dmitry Torokhov
2015-03-02 19:37 ` Scott Branden
2015-03-02 20:23 ` Dmitry Torokhov
2015-03-02 21:59 ` Scott Branden
2015-03-02 19:38 ` Scott Branden
2015-03-04 20:42 ` [PATCH v3 0/2] Add support for Broadcom RNG200 Scott Branden
2015-03-04 20:42 ` [PATCH v3 1/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-03-04 20:42 ` [PATCH v3 2/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-03-06 11:53 ` [PATCH v3 0/2] Add support for Broadcom RNG200 Herbert Xu
2015-03-05 15:59 ` [PATCH RESEND 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-03-05 15:59 ` [PATCH 1/4] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2015-03-05 15:59 ` [PATCH 2/4] mmc: sdhci: do not set AUTO_CMD12 for multi-block CMD53 Scott Branden
2015-03-05 15:59 ` [PATCH 3/4] mmc: sdhci-iproc: add IPROC SDHCI driver Scott Branden
2015-03-05 15:59 ` [PATCH 4/4] mmc: sdhci-iproc: add device tree bindings Scott Branden
2015-03-05 16:16 ` [PATCH RESEND 0/4] Add support for IPROC SDHCI controller Ulf Hansson
2015-03-05 19:57 ` Florian Fainelli
2015-03-16 18:19 ` [PATCH] ARM: amba: Increase number of IRQs Scott Branden
2015-03-16 21:08 ` Russell King - ARM Linux
2015-03-16 21:18 ` Scott Branden
2015-03-16 21:16 ` [PATCH v2 1/1] " Scott Branden
[not found] <Jonathan Richardson <jonathar@broadcom.com>
2014-09-16 19:58 ` [PATCH 0/6] Add initial support for Broadcom Cygnus SoC Jonathan Richardson
2014-09-16 19:58 ` [PATCH 1/6] ARM: cygnus: Initial " Jonathan Richardson
2014-09-17 0:00 ` Mark Rutland
2014-09-18 23:33 ` Jonathan Richardson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54356778.4090101@broadcom.com \
--to=sbranden@broadcom$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox