Subject: [PATCH v14 2/5] dt-bindings: document Rockchip thermal

From: [email-masked] (Caesar Wang)
Date: Tue, 28 Oct 2014 08:32:45 +0800

Dmitry,

? 2014?10?28? 08:29, Dmitry Torokhov ??:
> On Mon, Oct 27, 2014 at 10:39:45AM +0800, Caesar Wang wrote:
>> This add the necessary binding documentation for the thermal
>> found on Rockchip SoCs
>>
>> Signed-off-by: zhaoyifeng <[email-masked]>
>> Signed-off-by: Caesar Wang <[email-masked]>
>> ---
>>   .../bindings/thermal/rockchip-thermal.txt          | 53 ++++++++++++++++++++++
>>   1 file changed, 53 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
>> new file mode 100644
>> index 0000000..d5b1401
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
>> @@ -0,0 +1,53 @@
>> +* Temperature Sensor ADC (TSADC) on rockchip SoCs
>> +
>> +Required properties:
>> +- compatible : "rockchip,rk3288-tsadc"
>> +- reg : physical base address of the controller and length of memory mapped
>> +	region.
>> +- interrupts : The interrupt number to the cpu. The interrupt specifier format
>> +	       depends on the interrupt controller.
>> +- clocks : Must contain an entry for each entry in clock-names.
>> +- clock-names : Shall be "tsadc" for the converter-clock, and "apb_pclk" for
>> +		the peripheral clock.
>> +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> I think you are missing description of hw-shut-temp, tsadc-tshut-mode
> and tsadc-tshut-mode
>   and optional pinctrl settings.

If it's really need,we just have hw-shut-temp,tsadc-tshut-mode
and tsadc-tshut-mode,no need  pinctrl setting,I think.

>> +
>> +Exiample:
>> +tsadc: tsadc at ff280000 {
>> +	compatible = "rockchip,rk3288-tsadc";
>> +	reg = <0xff280000 0x100>;
>> +	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>> +	clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
>> +	clock-names = "tsadc", "apb_pclk";
>> +};
>> +
>> +Example: referring to thermal sensors:
>> +thermal-zones {
>> +	cpu_thermal: cpu_thermal {
>> +		polling-delay-passive = <1000>; /* milliseconds */
>> +		polling-delay = <5000>; /* milliseconds */
>> +
>> +		/* sensor	ID */
>> +		thermal-sensors = <&tsadc	1>;
>> +
>> +		trips {
>> +			cpu_alert0: cpu_alert {
>> +				temperature = <80000>; /* millicelsius */
>> +				hysteresis = <2000>; /* millicelsius */
>> +				type = "passive";
>> +			};
>> +			cpu_crit: cpu_crit {
>> +				temperature = <120000>; /* millicelsius */
>> +				hysteresis = <2000>; /* millicelsius */
>> +				type = "critical";
>> +			};
>> +		};
>> +
>> +		cooling-maps {
>> +			map0 {
>> +				trip = <&cpu_alert0>;
>> +				cooling-device =
>> +					<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +			};
>> +		};
>> +	};
>> +};
>> -- 
>> 1.9.1
>>
>>

-- 
Best regards,
Caesar