Subject: [PATCH 1/1] ARM: at91/dt: sam9263: Add CAN device nodes

From: [email-masked] (Nicolas Ferre)
Date: Mon, 3 Nov 2014 11:21:55 +0100

On 06/10/2014 16:09, Alexandre Belloni :
> On 06/10/2014 at 14:40:07 +0200, Alexander Stein wrote :
>> Add the missing CAN devices node including their pin muxing. The required
>> clock node already exists.
>>
>> Signed-off-by: Alexander Stein <[email-masked]>
> Acked-by: Alexandre Belloni <[email-masked]>

Acked-by: Nicolas Ferre <[email-masked]>
and stacked on top of at91-3.19-dt branch.

Thanks!

> 
>> ---
>>  arch/arm/boot/dts/at91sam9263.dtsi | 19 +++++++++++++++++++
>>  1 file changed, 19 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
>> index bb23c2d..174ab77 100644
>> --- a/arch/arm/boot/dts/at91sam9263.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9263.dtsi
>> @@ -672,6 +672,14 @@
>>  					};
>>  				};
>>  
>> +				can {
>> +					pinctrl_can_rx_tx: can_rx_tx {
>> +						atmel,pins =
>> +							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* CANRX, conflicts with IRQ0 */
>> +							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* CANTX, conflicts with PCK0 */
>> +					};
>> +				};
>> +
>>  				pioA: gpio at fffff200 {
>>  					compatible = "atmel,at91rm9200-gpio";
>>  					reg = <0xfffff200 0x200>;
>> @@ -898,6 +906,17 @@
>>  				clock-names = "pwm_clk";
>>  				status = "disabled";
>>  			};
>> +
>> +			can: can at fffac000 {
>> +				compatible = "atmel,at91sam9263-can";
>> +				reg = <0xfffac000 0x300>;
>> +				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&pinctrl_can_rx_tx>;
>> +				clocks = <&can_clk>;
>> +				clock-names = "can_clk";
>> +				status = "disabled";
>> +			};
>>  		};
>>  
>>  		fb0: fb at 0x00700000 {
>> -- 
>> 2.0.4
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

-- 
Nicolas Ferre