From: kgene.kim@samsung•com (Kukjin Kim)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v2] ARM: dts: add board dts file for Exynos3250-based Monk board
Date: Wed, 19 Nov 2014 16:47:05 +0900 [thread overview]
Message-ID: <546C4AF9.2060306@samsung.com> (raw)
In-Reply-To: <546AE8EC.9010708@samsung.com>
On 11/18/14 15:36, Chanwoo Choi wrote:
> Dear Kukjin,
>
Hi,
> Could you please review or pick this patchset?
>
> Best Regards,
> Chanwoo Choi
>
> On 10/08/2014 11:11 AM, YoungJun Cho wrote:
>> From: Youngjun Cho <yj44.cho@samsung•com>
>>
>> This patch adds new board dts file to support Samsung Monk board which is
>> based on Exynos3250 SoC and has different H/W configuration from Rinato.
>>
>> This patch is based on linux-samsung.git for-next branch and depends on
>> [PATCHv2 0/2] ARM: dts: Add new board dts file for Exynos3250-based Rinato board
>>
>> Changes from v1:
>> - The 'memory' entries coalesce into one entry
>> - Removes useless space
>> - Puts voltage-regulator-0 under the root node
>>
>> This dts file support following features:
>> - eMMC
>> - Main PMIC (Samsung S2MPS14)
>> - Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger)
>> - RTC of Exynos3250
>> - ADC of Exynos3250 with NTC thermistor
>> - I2S of Exynos3250
>> - TMU of Exynos3250
>> - Secure firmware for Exynos3250 secondary cpu boot
>> - Serial ports of Exynos3250
>> - gpio-key for power key
>>
>> Signed-off-by: Youngjun Cho <yj44.cho@samsung•com>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung•com>
>> Signed-off-by: Inki Dae <inki.dae@samsung•com>
>> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung•com>
>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung•com>
>> Signed-off-by: Kyungmin Park <kyungmin.park@samsung•com>
>> ---
>> arch/arm/boot/dts/Makefile | 3 +-
>> arch/arm/boot/dts/exynos3250-monk.dts | 583 ++++++++++++++++++++++++++++++++++
>> 2 files changed, 585 insertions(+), 1 deletion(-)
>> create mode 100644 arch/arm/boot/dts/exynos3250-monk.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 5728918..0c8ae64 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -64,7 +64,8 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \
>> dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
>> da850-evm.dtb
>> dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
>> -dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-rinato.dtb \
>> +dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \
>> + exynos3250-rinato.dtb \
>> exynos4210-origen.dtb \
>> exynos4210-smdkv310.dtb \
>> exynos4210-trats.dtb \
>> diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
>> new file mode 100644
>> index 0000000..615672f
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos3250-monk.dts
>> @@ -0,0 +1,583 @@
>> +/*
>> + * Samsung's Exynos3250 based Monk board device tree source
>> + *
>> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
>> + * http://www.samsung.com
>> + *
>> + * Device tree source file for Samsung's Monk board which is based on
>> + * Samsung Exynos3250 SoC.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +/dts-v1/;
>> +#include "exynos3250.dtsi"
>> +#include <dt-bindings/input/input.h>
>> +
>> +/ {
>> + model = "Samsung Monk board";
>> + compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
>> +
>> + aliases {
>> + i2c7 = &i2c_max77836;
>> + };
>> +
>> + memory {
>> + reg = <0x40000000 0x1ff00000>;
>> + };
>> +
>> + chosen {
>> + bootargs = "console=ttySAC1,115200N8 root=/dev/mmcblk0p15 rootwait earlyprintk panic=5";
Actually, the bootargs can be supplied from bootloader and can be
removed from here and it's a recent requirement from mailinglist. But
I've already applied similar one in rinato.dts. So please cleanup them
together later...? :)
[snip]
Will apply, thanks.
- Kukjin
next prev parent reply other threads:[~2014-11-19 7:47 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-02 0:50 [PATCH] ARM: dts: add board dts file for Exynos3250-based Monk board YoungJun Cho
2014-10-02 6:57 ` Kyungmin Park
2014-10-02 11:22 ` Mark Rutland
2014-10-08 2:11 ` [PATCH v2] " YoungJun Cho
2014-11-18 6:36 ` Chanwoo Choi
2014-11-19 7:47 ` Kukjin Kim [this message]
2014-11-19 8:16 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=546C4AF9.2060306@samsung.com \
--to=kgene.kim@samsung$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox