Subject: [PATCH 1/3] staging: imx-drm: document internal HDMI I2C master controller DT binding

From: [email-masked] (Vladimir Zapolskiy)
Date: Mon, 1 Dec 2014 16:54:11 +0200

Hi Philipp and Shawn,

On 15.11.2014 19:49, Vladimir Zapolskiy wrote:
> Provide information about how to bind internal iMX6Q/DL HDMI DDC I2C
> master controller. The property is set as optional one, because iMX6
> HDMI DDC bus may be represented by one of general purpose I2C busses
> found on SoC.
> 
> Signed-off-by: Vladimir Zapolskiy <[email-masked]>
> Cc: Wolfram Sang <[email-masked]>
> Cc: Philipp Zabel <[email-masked]>
> Cc: Shawn Guo <[email-masked]>
> Cc: devicetree at vger.kernel.org
> Cc: linux-media at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-i2c at vger.kernel.org
> ---
>  Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt |   10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt b/Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
> index 1b756cf..43c8924 100644
> --- a/Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
> +++ b/Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
> @@ -10,6 +10,8 @@ Required properties:
>   - #address-cells : should be <1>
>   - #size-cells : should be <0>
>   - compatible : should be "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
> +   If internal HDMI DDC I2C master controller is supposed to be used,
> +   then "simple-bus" should be added to compatible value.
>   - gpr : should be <&gpr>.
>     The phandle points to the iomuxc-gpr region containing the HDMI
>     multiplexer control register.
> @@ -22,6 +24,7 @@ Required properties:
>  
>  Optional properties:
>   - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
> + - ddc: internal HDMI DDC I2C master controller
>  
>  example:
>  
> @@ -32,7 +35,7 @@ example:
>          hdmi: hdmi at 0120000 {
>                  #address-cells = <1>;
>                  #size-cells = <0>;
> -                compatible = "fsl,imx6q-hdmi";
> +                compatible = "fsl,imx6q-hdmi", "simple-bus";
>                  reg = <0x00120000 0x9000>;
>                  interrupts = <0 115 0x04>;
>                  gpr = <&gpr>;
> @@ -40,6 +43,11 @@ example:
>                  clock-names = "iahb", "isfr";
>                  ddc-i2c-bus = <&i2c2>;
>  
> +                hdmi_ddc: ddc {
> +                        compatible = "fsl,imx6q-hdmi-ddc";
> +                        status = "disabled";
> +                };
> +
>                  port at 0 {
>                          reg = <0>;
>  
> 

knowing in advance that I2C framework lacks a graceful support of non
fully compliant I2C devices, do you have any objections to the proposed
iMX HDMI DTS change?

--
With best wishes,
Vladimir