From: nicolas.ferre@atmel•com (Nicolas Ferre)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 0/4] mtd: nand: atmel: Rework DT representation of NFC/NAND
Date: Fri, 5 Dec 2014 18:07:08 +0100 [thread overview]
Message-ID: <5481E63C.5020208@atmel.com> (raw)
In-Reply-To: <1417732214-3292-1-git-send-email-boris.brezillon@free-electrons.com>
Le 04/12/2014 23:30, Boris Brezillon a ?crit :
> Hello,
>
> While working on the EBI driver [1] I noticed that the relationship between
> the NFC (NAND Flash Controller) and the NAND chip it is attached to would
> make things harder to represent when moving the NAND node under the EBI bus
> (another useless 'ranges' definition).
>
> Actually this representation might be even more problematic if one wants
> decide to connect two NAND chips on his sama5 based board, because the NFC
> node is a child of the NAND chip node, and thus can only be attached to a
> single NAND chip.
>
> To address this problem the current series moves the NFC node outside of
> the NAND chip device which then reference the NFC using the "atmel,nfc"
> property.
>
> The series does not implement multi-chip support, but at least the new
> representation should make it possible.
>
> Best Regards,
>
> Boris
>
> [1]https://lkml.org/lkml/2014/12/3/806
Boris,
It sounds promising and for sure we have to think about a way to deal
with SMC (EBI interface) and the NAND controller with its attributes
(PMECC) or flavors (plain SMC or NFC).
Let's consider this as a RFC and discuss how to deal with the DT
modifications and the representation hierarchy all together.
Thanks, bye.
> Boris Brezillon (4):
> mtd: nand: atmel: Rework driver to separate nfc and nand nodes
> mtd: nand: atmel: Update DT documentation after splitting NFC and NAND
> ARM: at91/dt: sama5: move NFC nodes outside of NAND nodes
> ARM: at91/dt: sama5: move NAND nodes into board dts/dtsi
>
> .../devicetree/bindings/mtd/atmel-nand.txt | 46 +++++++------
> arch/arm/boot/dts/at91-sama5d3_xplained.dts | 18 ++++-
> arch/arm/boot/dts/at91-sama5d4ek.dts | 16 ++++-
> arch/arm/boot/dts/sama5d3.dtsi | 36 ++--------
> arch/arm/boot/dts/sama5d3xcm.dtsi | 18 ++++-
> arch/arm/boot/dts/sama5d4.dtsi | 36 ++--------
> drivers/mtd/nand/atmel_nand.c | 76 +++++++++++++++++-----
> 7 files changed, 149 insertions(+), 97 deletions(-)
>
--
Nicolas Ferre
next prev parent reply other threads:[~2014-12-05 17:07 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 22:30 [PATCH 0/4] mtd: nand: atmel: Rework DT representation of NFC/NAND Boris Brezillon
2014-12-04 22:30 ` [PATCH 1/4] mtd: nand: atmel: Rework driver to separate nfc and nand nodes Boris Brezillon
2014-12-26 9:28 ` Josh Wu
2014-12-04 22:30 ` [PATCH 2/4] mtd: nand: atmel: Update DT documentation after splitting NFC and NAND Boris Brezillon
2014-12-26 9:30 ` Josh Wu
2014-12-29 12:30 ` Boris Brezillon
2015-02-02 7:57 ` Brian Norris
2015-02-02 9:42 ` Boris Brezillon
2015-02-03 8:46 ` Josh Wu
2015-02-03 9:37 ` Boris Brezillon
2015-02-04 10:23 ` Josh Wu
[not found] ` <54D1EF2D.7000108@atmel.com>
2015-02-04 10:47 ` Boris Brezillon
2014-12-04 22:30 ` [PATCH 3/4] ARM: at91/dt: sama5: move NFC nodes outside of NAND nodes Boris Brezillon
2014-12-04 22:30 ` [PATCH 4/4] ARM: at91/dt: sama5: move NAND nodes into board dts/dtsi Boris Brezillon
2014-12-26 9:45 ` Josh Wu
2014-12-29 12:28 ` Boris Brezillon
2014-12-05 17:07 ` Nicolas Ferre [this message]
2015-02-02 8:00 ` [PATCH 0/4] mtd: nand: atmel: Rework DT representation of NFC/NAND Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5481E63C.5020208@atmel.com \
--to=nicolas.ferre@atmel$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox