Subject: [PATCH v4 5/5] media: ov2640: dt: add the device tree binding document

From: [email-masked] (Josh Wu)
Date: Mon, 22 Dec 2014 18:32:07 +0800

Hi, Sylwester

On 12/18/2014 8:13 PM, Sylwester Nawrocki wrote:
> Hi Josh,
>
> On 18/12/14 03:27, Josh Wu wrote:
>> Add the document for ov2640 dt.
>>
>> Cc: devicetree at vger.kernel.org
>> Signed-off-by: Josh Wu <[email-masked]>
> Acked-by: Sylwester Nawrocki <[email-masked]>
Thanks.

>
> It seems "ovti" is not in the list of vendor prefixes. You may want
> to send a patch adding it to Documentation/devicetree/bindings/
> vendor-prefixes.txt.
>
> Just few minor comments below..
>
>>   .../devicetree/bindings/media/i2c/ov2640.txt       | 46 ++++++++++++++++++++++
>>   1 file changed, 46 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2640.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
>> new file mode 100644
>> index 0000000..de11ebb
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
>> @@ -0,0 +1,46 @@
>> +* Omnivision ov2640 CMOS sensor
> s/ov2640/OV2640 ?

OK.
>
>> +
>> +The Omnivision OV2640 sensor support multiple resolutions output, such as
>> +CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB
>> +output format.
>> +
>> +Required Properties:
>> +- compatible: Must be "ovti,ov2640"
> I believe it is preferred to put it as "Should contain", rather than
> "Must be".
I don't have a strong opinion here. After check many documents, it seems 
many people use "Should be".
Is it okay?

Best Regards,
Josh Wu

>
>> +- clocks: reference to the xvclk input clock.
>> +- clock-names: Must be "xvclk".
> --
> Regards,
> Sylwester