Subject: [PATCH 3/5] tty/serial: at91: fix error handling in atmel_serial_probe()

From: [email-masked] (Nicolas Ferre)
Date: Fri, 9 Jan 2015 16:28:58 +0100

Le 09/12/2014 14:31, Cyrille Pitchen a ?crit :
> -EDEFER error wasn't handle properly by atmel_serial_probe().
> As an example, when atmel_serial_probe() is called for the first time, we pass
> the test_and_set_bit() test to check whether the port has already been
> initalized. Then we call atmel_init_port(), which may return -EDEFER, possibly
> returned before by clk_get(). Consequently atmel_serial_probe() used to return
> this error code WITHOUT clearing the port bit in the "atmel_ports_in_use" mask.
> When atmel_serial_probe() was called for the second time, it used to fail on
> the test_and_set_bit() function then returning -EBUSY.
> 
> When atmel_serial_probe() fails, this patch make it clear the port bit in the
> "atmel_ports_in_use" mask, if needed, before returning the error code.
> 
> Signed-off-by: Cyrille Pitchen <[email-masked]>

Acked-by: Nicolas Ferre <[email-masked]>
and you can also add:
Cc: <[email-masked]> # 3.12+

Thanks.

> ---
>  drivers/tty/serial/atmel_serial.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index c6621dc..92a8b26 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -2565,7 +2565,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
>  
>  	ret = atmel_init_port(port, pdev);
>  	if (ret)
> -		goto err;
> +		goto err_clear_bit;
>  
>  	if (!atmel_use_pdc_rx(&port->uart)) {
>  		ret = -ENOMEM;
> @@ -2628,6 +2628,8 @@ err_alloc_ring:
>  		clk_put(port->clk);
>  		port->clk = NULL;
>  	}
> +err_clear_bit:
> +	clear_bit(port->uart.line, atmel_ports_in_use);
>  err:
>  	return ret;
>  }
> 

-- 
Nicolas Ferre