From: nicolas.ferre@atmel•com (Nicolas Ferre)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 5/5] tty/serial: at91: fix typo and indentation
Date: Fri, 9 Jan 2015 16:41:26 +0100 [thread overview]
Message-ID: <54AFF6A6.4060204@atmel.com> (raw)
In-Reply-To: <faa94cfe2de1047de096b51c780f6e408aced2fb.1418131298.git.cyrille.pitchen@atmel.com>
Le 09/12/2014 14:31, Cyrille Pitchen a ?crit :
> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel•com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel•com>
thanks Cyrille. Bye.
> ---
> drivers/tty/serial/atmel_serial.c | 40 +++++++++++++++++++++------------------
> 1 file changed, 22 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index 9e0c636..846552b 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -738,7 +738,11 @@ static void atmel_complete_tx_dma(void *arg)
> if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
> uart_write_wakeup(port);
>
> - /* Do we really need this? */
> + /*
> + * xmit is a circular buffer so, if we have just send data from
> + * xmit->tail to the end of xmit->buf, now we have to transmit the
> + * remaining data from the beginning of xmit->buf to xmit->head.
> + */
> if (!uart_circ_empty(xmit))
> tasklet_schedule(&atmel_port->tasklet);
>
> @@ -797,11 +801,11 @@ static void atmel_tx_dma(struct uart_port *port)
> BUG_ON(!sg_dma_len(sg));
>
> desc = dmaengine_prep_slave_sg(chan,
> - sg,
> - 1,
> - DMA_MEM_TO_DEV,
> - DMA_PREP_INTERRUPT |
> - DMA_CTRL_ACK);
> + sg,
> + 1,
> + DMA_MEM_TO_DEV,
> + DMA_PREP_INTERRUPT |
> + DMA_CTRL_ACK);
> if (!desc) {
> dev_err(port->dev, "Failed to send via dma!\n");
> return;
> @@ -1025,13 +1029,13 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
> /* UART circular rx buffer is an aligned page. */
> BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
> sg_set_page(&atmel_port->sg_rx,
> - virt_to_page(ring->buf),
> - ATMEL_SERIAL_RINGSIZE,
> - (int)ring->buf & ~PAGE_MASK);
> - nent = dma_map_sg(port->dev,
> - &atmel_port->sg_rx,
> - 1,
> - DMA_FROM_DEVICE);
> + virt_to_page(ring->buf),
> + ATMEL_SERIAL_RINGSIZE,
> + (int)ring->buf & ~PAGE_MASK);
> + nent = dma_map_sg(port->dev,
> + &atmel_port->sg_rx,
> + 1,
> + DMA_FROM_DEVICE);
>
> if (!nent) {
> dev_dbg(port->dev, "need to release resource of dma\n");
> @@ -1060,11 +1064,11 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
> * each one is half ring buffer size
> */
> desc = dmaengine_prep_dma_cyclic(atmel_port->chan_rx,
> - sg_dma_address(&atmel_port->sg_rx),
> - sg_dma_len(&atmel_port->sg_rx),
> - sg_dma_len(&atmel_port->sg_rx)/2,
> - DMA_DEV_TO_MEM,
> - DMA_PREP_INTERRUPT);
> + sg_dma_address(&atmel_port->sg_rx),
> + sg_dma_len(&atmel_port->sg_rx),
> + sg_dma_len(&atmel_port->sg_rx)/2,
> + DMA_DEV_TO_MEM,
> + DMA_PREP_INTERRUPT);
> desc->callback = atmel_complete_rx_dma;
> desc->callback_param = port;
> atmel_port->desc_rx = desc;
>
--
Nicolas Ferre
prev parent reply other threads:[~2015-01-09 15:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-09 13:31 [PATCH 0/5] tty/serial: at91: fix atmel_serial_probe(), dma_sync_* and the Hardware Handshaking support Cyrille Pitchen
2014-12-09 13:31 ` [PATCH 1/5] tty/serial: at91: use correct type for dma_sync_*_for_cpu() and dma_sync_*_for_device() Cyrille Pitchen
2015-01-09 15:13 ` Nicolas Ferre
2015-01-09 22:19 ` Greg KH
2014-12-09 13:31 ` [PATCH 2/5] tty/serial: at91: enable peripheral clock before accessing I/O registers Cyrille Pitchen
2015-01-09 15:12 ` Nicolas Ferre
2014-12-09 13:31 ` [PATCH 3/5] tty/serial: at91: fix error handling in atmel_serial_probe() Cyrille Pitchen
2015-01-09 15:28 ` Nicolas Ferre
2014-12-09 13:31 ` [PATCH 4/5] tty/serial: at91: fix RTS line management when hardware handshake is enabled Cyrille Pitchen
2015-01-09 15:40 ` Nicolas Ferre
2014-12-09 13:31 ` [PATCH 5/5] tty/serial: at91: fix typo and indentation Cyrille Pitchen
2015-01-09 15:41 ` Nicolas Ferre [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54AFF6A6.4060204@atmel.com \
--to=nicolas.ferre@atmel$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox