Subject: [alsa-devel] [PATCH] ASoC: wm8904: fix runtime warning

From: [email-masked] (Bo Shen)
Date: Tue, 13 Jan 2015 13:36:21 +0800

Hi Lars-Perter Clausen,

On 01/12/2015 05:30 PM, Lars-Peter Clausen wrote:
> On 01/12/2015 04:32 AM, Bo Shen wrote:
> [...]
>>>> diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
>>>> index 4d2d2b1..38582d7 100644
>>>> --- a/sound/soc/codecs/wm8904.c
>>>> +++ b/sound/soc/codecs/wm8904.c
>>>> @@ -1076,10 +1076,10 @@ static const struct snd_soc_dapm_route
>>>> adc_intercon[] = {
>>>>       { "Right Capture PGA", NULL, "Right Capture Mux" },
>>>>       { "Right Capture PGA", NULL, "Right Capture Inverting Mux" },
>>>>
>>>> -    { "AIFOUTL", "Left",  "ADCL" },
>>>> -    { "AIFOUTL", "Right", "ADCR" },
>>>> -    { "AIFOUTR", "Left",  "ADCL" },
>>>> -    { "AIFOUTR", "Right", "ADCR" },
>>>> +    { "AIFOUTL", NULL, "ADCL" },
>>>> +    { "AIFOUTL", NULL, "ADCR" },
>>>> +    { "AIFOUTR", NULL, "ADCL" },
>>>> +    { "AIFOUTR", NULL, "ADCR" },
>>>
>>> Is this the right fix here? I am not super familiar with the
>>> driver but it appears to contain an "AIFOUTL Mux" control which
>>> is not connected to anything. Looks like maybe this is a mistake
>>> the mux is indeded to be included in the path? Feels like we
>>> should either remove the control as well or hook it into the
>>> path.
>>
>> Thank for your information.
>> I think here it should correct the path name as
>> --->8---
>> { "AIFOUTL Mux", "Left",  "ADCL" },
>> { "AIFOUTL Mux", "Right", "ADCR" },
>> { "AIFOUTR Mux", "Left",  "ADCL" },
>> { "AIFOUTR Mux", "Right", "ADCR" },
>> ---8<---
>>
>> Thanks again. I will send out the new version.
>
> Your probably also need to connect the mux to the output pins.

Thanks for you information, after check the datasheet, I still don't 
know which the mux should connect to which output pins.

Best Regards,
Bo Shen