From: nicolas.ferre@atmel•com (Nicolas Ferre)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v2 0/8] AT91 cleanup for 3.20 #2
Date: Fri, 16 Jan 2015 18:11:23 +0100 [thread overview]
Message-ID: <54B9463B.2020304@atmel.com> (raw)
In-Reply-To: <1421333971-7581-1-git-send-email-alexandre.belloni@free-electrons.com>
Le 15/01/2015 15:59, Alexandre Belloni a ?crit :
> This patch sets is based on AT91 cleanup for 3.20 #1
> and depends on AT91 DT for 3.20 #1 because it uses the added SRAM nodes.
>
> The first two patches rework the pm code to get rid of cpu_is_xxx (they will be
> dropped soon) and use the SRAM from the genpool instead of relying on the remap
> done by at91_init_sram.
>
> The 3rd and 4th patches a reworking the pm code further to move at91_pm_init in
> the .init_machine of the SoCs instead of arch_initcall, to get ready for
> multiplatform.
>
> Then the following patches get rid of at91_init_sram, taking .map_io for almost
> all SoCs but the sama5d4 (more cleanups coming soon for that part).
>
> The final patch moves at91rm9200_idle to clk/at91/pmc.c and allows to almost
> empty arch/arm/mach-at91/at91rm9200.c (It is actually empty once "Atmel System
> Timer cleanups" is applied).
>
> Changes in v2:
> - added patch 3 and 4 to remove the calls to of_machine_is_compatible()
>
> Alexandre Belloni (8):
> ARM: at91: pm: rework cpu detection
> ARM: at91: pm: use the mmio-sram pool to access SRAM
> ARM: at91: pm: add UDP and UHP checks to newer SoCs
> ARM: at91: pm: prepare for multiplatform
> ARM: at91: remove useless map_io
> ARM: at91: sama5d4: remove useless call to at91_init_sram
> ARM: at91: remove unused at91_init_sram
> ARM: at91: move at91rm9200_idle() to clk/at91/pmc.c
Okay for the whole series. I'm looking forward including the upcoming
one as well.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel•com>
All stacked on top of at91-3.20-cleanup.
Thanks, bye.
> arch/arm/mach-at91/Kconfig | 1 +
> arch/arm/mach-at91/at91rm9200.c | 15 -----
> arch/arm/mach-at91/at91sam9260.c | 27 ---------
> arch/arm/mach-at91/at91sam9261.c | 9 ---
> arch/arm/mach-at91/at91sam9263.c | 7 ---
> arch/arm/mach-at91/at91sam9g45.c | 7 ---
> arch/arm/mach-at91/at91sam9n12.c | 6 --
> arch/arm/mach-at91/at91sam9rl.c | 18 ------
> arch/arm/mach-at91/at91sam9x5.c | 6 --
> arch/arm/mach-at91/board-dt-rm9200.c | 11 ++++
> arch/arm/mach-at91/board-dt-sam9.c | 27 +++++++++
> arch/arm/mach-at91/board-dt-sama5.c | 1 +
> arch/arm/mach-at91/generic.h | 15 ++++-
> arch/arm/mach-at91/pm.c | 110 ++++++++++++++++++++++++++---------
> arch/arm/mach-at91/sama5d3.c | 6 --
> arch/arm/mach-at91/sama5d4.c | 1 -
> arch/arm/mach-at91/setup.c | 20 -------
> drivers/clk/at91/pmc.c | 9 +++
> 18 files changed, 146 insertions(+), 150 deletions(-)
>
--
Nicolas Ferre
prev parent reply other threads:[~2015-01-16 17:11 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-15 14:59 [PATCH v2 0/8] AT91 cleanup for 3.20 #2 Alexandre Belloni
2015-01-15 14:59 ` [PATCH v2 1/8] ARM: at91: pm: rework cpu detection Alexandre Belloni
2015-01-16 2:44 ` Yang, Wenyou
2015-01-16 10:26 ` Alexandre Belloni
2015-01-15 14:59 ` [PATCH v2 2/8] ARM: at91: pm: use the mmio-sram pool to access SRAM Alexandre Belloni
2015-01-15 14:59 ` [PATCH v2 3/8] ARM: at91: pm: add UDP and UHP checks to newer SoCs Alexandre Belloni
2015-01-15 14:59 ` [PATCH v2 4/8] ARM: at91: pm: prepare for multiplatform Alexandre Belloni
2015-01-22 16:03 ` [PATCH] ARM: at91: fix PM initialization for newer SoCs Nicolas Ferre
2015-01-22 16:07 ` [PATCH v2] " Nicolas Ferre
2015-01-23 7:50 ` Jean-Christophe PLAGNIOL-VILLARD
2015-01-23 10:11 ` Alexandre Belloni
2015-01-15 14:59 ` [PATCH v2 5/8] ARM: at91: remove useless map_io Alexandre Belloni
2015-01-15 14:59 ` [PATCH v2 6/8] ARM: at91: sama5d4: remove useless call to at91_init_sram Alexandre Belloni
2015-01-15 14:59 ` [PATCH v2 7/8] ARM: at91: remove unused at91_init_sram Alexandre Belloni
2015-01-15 14:59 ` [PATCH v2 8/8] ARM: at91: move at91rm9200_idle() to clk/at91/pmc.c Alexandre Belloni
2015-01-16 17:11 ` Nicolas Ferre [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54B9463B.2020304@atmel.com \
--to=nicolas.ferre@atmel$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox