From: gregory.clement@free-electrons•com (Gregory CLEMENT)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 0/7] Fixes and improvements for SDHCI on Armada 38x
Date: Wed, 21 Jan 2015 15:44:00 +0100 [thread overview]
Message-ID: <54BFBB30.9060205@free-electrons.com> (raw)
In-Reply-To: <1421832726-21656-1-git-send-email-gregory.clement@free-electrons.com>
On 21/01/2015 10:31, Gregory CLEMENT wrote:
> Hi,
>
> this series brings fixes and improvements for the SDHCI controller of
> the Armada 38x SoCs.
>
> The first two patches are fixes and should be also applied on the
> stable branch (I added stable in copy for this).
>
> The first one removes the SDR50 and DDR50 mode timing from the
> capabilities of the controller because the current implementation
> doesn't support it.
>
> The second one fix controller's caps according to the limitation of
> the hardware.
>
> The third one extends the Device Tree binding of the Armada 38x. It
> allows using the SDIO3 configuration register.
>
> The forth patch adds the support of this new register in the
> driver. Thanks to this one, specific clock adjustments can be done in
> order to support the SDR50 and DDR50 modes timing.
>
> The fifth patch is device tree clean-up.
>
> The sixth patch update the SDHCI node on Armada 38x in order to use
> the new register and then to be able to support the SDR50 and DDR50
> modes timing.
>
> Finally, the seventh patch add the description of SDHCI for the Armada
> 388 RD board which was missing.
>
> Patches 1 to 4 should be merged through the mmc tree and patches 5 to
> 7 should be merged through mvebu and then arm-soc.
>
> Patch 4 depend on patch 2.
> Patch 2 depend on patch 1.
> And patch 1 depend on commit aa8165f91442 "mmc: sdhci-pxav3: do the
> mbus window configuration after enabling clocks" which have been
> merged.
>
> But as all this patch should be merged through the same tree it would
> not be a problem
>
> The patches 5 to 7 depend on the patches already merged in mvebu.
>
> As they are fixes, patches 1 and 2 should be merged in 3.18-rc or at
> least in 3.19 and then they will be part of 3.18.1. For the other
> patches it would be nice if they could be part of 3.19.
I shifted the kernel release by one! I meant:
As they are fixes, patches 1 and 2 should be merged in _3.19-rc_ or at
least in _3.20_ and then they will be part of _3.19.1_. For the other
patches it would be nice if they could be part of _3.20_.
Thanks,
Gregory
>
> Thanks,
>
> Gregory
>
> Gregory CLEMENT (7):
> mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x
> flavor
> mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to
> erratum ERR-7878951
> mmc: sdhci-pxav3: Extend binding with SDIO3 conf reg for the Armada
> 38x
> mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes
> ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci node
> ARM: mvebu: Update the SDHCI node on Armada 38x
> ARM: mvebu: Add Device Tree description of SDHCI for Armada 388 RD
>
> .../devicetree/bindings/mmc/sdhci-pxa.txt | 15 ++--
> arch/arm/boot/dts/armada-388-rd.dts | 10 +++
> arch/arm/boot/dts/armada-38x.dtsi | 7 +-
> drivers/mmc/host/sdhci-pxav3.c | 79 ++++++++++++++++++++++
> 4 files changed, 105 insertions(+), 6 deletions(-)
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
prev parent reply other threads:[~2015-01-21 14:44 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-21 9:31 [PATCH 0/7] Fixes and improvements for SDHCI on Armada 38x Gregory CLEMENT
2015-01-21 9:32 ` [PATCH 1/7] mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor Gregory CLEMENT
2015-01-21 9:32 ` [PATCH 2/7] mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951 Gregory CLEMENT
2015-01-21 14:52 ` Marcin Wojtas
2015-01-21 14:58 ` Gregory CLEMENT
2015-01-21 9:32 ` [PATCH 3/7] mmc: sdhci-pxav3: Extend binding with SDIO3 conf reg for the Armada 38x Gregory CLEMENT
2015-01-21 9:32 ` [PATCH 4/7] mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes Gregory CLEMENT
2015-01-21 9:32 ` [PATCH 5/7] ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci node Gregory CLEMENT
2015-01-21 9:32 ` [PATCH 6/7] ARM: mvebu: Update the SDHCI node on Armada 38x Gregory CLEMENT
2015-01-21 9:32 ` [PATCH 7/7] ARM: mvebu: Add Device Tree description of SDHCI for Armada 388 RD Gregory CLEMENT
2015-01-21 14:44 ` Gregory CLEMENT [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54BFBB30.9060205@free-electrons.com \
--to=gregory.clement@free-electrons$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox