Subject: [PATCH v6 5/8] iio: adc: fsl,imx25-gcq driver

From: [email-masked] (Varka Bhadram)
Date: Thu, 29 Jan 2015 20:00:49 +0530

Hi,

On Thursday 29 January 2015 07:39 PM, Markus Pargmann wrote:
> This is a conversion queue driver for the mx25 SoC. It uses the central
> ADC which is used by two seperate independent queues. This driver
> prepares different conversion configurations for each possible input.
> For a conversion it creates a conversionqueue of one item with the
> correct configuration for the chosen channel. It then executes the queue
> once and disables the conversion queue afterwards.
>
> The reference voltages are configurable through devicetree subnodes,
> depending on the connections of the ADC inputs.
>
> Signed-off-by: Markus Pargmann <[email-masked]>
> Signed-off-by: Denis Carikli <[email-masked]>
> Signed-off-by: Markus Pargmann <[email-masked]>
> ---
>   drivers/iio/adc/Kconfig                     |   7 +
>   drivers/iio/adc/Makefile                    |   1 +
>   drivers/iio/adc/fsl-imx25-gcq.c             | 361 ++++++++++++++++++++++++++++
>   include/dt-bindings/iio/adc/fsl-imx25-gcq.h |  18 ++
>   4 files changed, 387 insertions(+)
>   create mode 100644 drivers/iio/adc/fsl-imx25-gcq.c
>   create mode 100644 include/dt-bindings/iio/adc/fsl-imx25-gcq.h
>
(...)

> +static int mx25_gcq_probe(struct platform_device *pdev)
> +{
> +	struct iio_dev *indio_dev;
> +	struct mx25_gcq_priv *priv;
> +	struct mx25_tsadc *tsadc = dev_get_drvdata(pdev->dev.parent);
> +	struct device *dev = &pdev->dev;
> +	struct resource *res;
> +	void __iomem *mem;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	priv = iio_priv(indio_dev);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	mem = devm_ioremap_resource(dev, res);
> +	if (!mem)
> +		return -ENOMEM;
> +
> +	priv->regs = devm_regmap_init_mmio(dev, mem, &mx25_gcq_regconfig);
> +	if (IS_ERR(priv->regs)) {
> +		dev_err(dev, "Failed to initialize regmap\n");
> +		return PTR_ERR(priv->regs);
> +	}
> +
> +	init_completion(&priv->completed);
> +
> +	/* Optional external regulator */
> +	priv->ext_vref = devm_regulator_get(&pdev->dev, "vref");
> +	if (!IS_ERR_OR_NULL(priv->ext_vref)) {
> +		ret = regulator_enable(priv->ext_vref);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	ret = mx25_gcq_setup_cfgs(pdev, priv);
> +	if (ret)
> +		return ret;
> +
> +	priv->clk = tsadc->clk;
> +	ret = clk_prepare_enable(priv->clk);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable clock\n");
> +		return ret;
> +	}
> +
> +	priv->irq = platform_get_irq(pdev, 0);
> +	if (priv->irq <= 0) {
> +		dev_err(dev, "Failed to get IRQ\n");
> +		ret = priv->irq;
> +		goto err_clk_unprepare;
> +	}
> +
> +	ret = request_irq(priv->irq, mx25_gcq_irq, 0, pdev->name, priv);

Use of devm_* API

> +	if (ret) {
> +		dev_err(dev, "Failed requesting IRQ\n");
> +		goto err_clk_unprepare;
> +	}
> +
> +	indio_dev->dev.parent = &pdev->dev;
> +	indio_dev->channels = mx25_gcq_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(mx25_gcq_channels);
> +	indio_dev->info = &mx25_gcq_iio_info;
> +
> +	ret = iio_device_register(indio_dev);
> +	if (ret) {
> +		dev_err(dev, "Failed to register iio device\n");
> +		goto err_irq_free;
> +	}
> +
> +	platform_set_drvdata(pdev, priv);
> +
> +	return 0;
> +
> +err_irq_free:
> +	free_irq(priv->irq, (void *)priv);

This is not required if use devm_*

> +err_clk_unprepare:
> +	clk_disable_unprepare(priv->clk);
> +	return ret;
> +}
> +
> +static int mx25_gcq_remove(struct platform_device *pdev)
> +{
> +	struct mx25_gcq_priv *priv = platform_get_drvdata(pdev);
> +	struct iio_dev *indio_dev = iio_priv_to_dev(pdev);
> +
> +	iio_device_unregister(indio_dev);
> +	free_irq(priv->irq, priv);

Dto...

-- 
Thanks,
Varka Bhadram.