Subject: [PATCH 1/6] ASoC: max98088: Document DT bindings

From: [email-masked] (Javier Martinez Canillas)
Date: Mon, 23 Feb 2015 17:46:17 +0100

Hello Sylwester,

On 02/20/2015 01:12 PM, Sylwester Nawrocki wrote:
> On 20/02/15 01:36, Andreas F?rber wrote:
>>>> >> So it seems the mclk is not always set up properly by the kernel,
>>>> >> relying on firmware. Who's in charge of setting that clock up?
>>> > 
>>> > Right, it seems audio is only working due the firmware doing some previous
>>> > setup. Probably it works on every boot if you have "sound init" as a part of
>>> > the u-boot boot commands?
>>
>> Indeed it does, 24 MHz without the reparenting patch, and sound working.
> 
> You can have parent of the CLKOUT clock set by the clk core if it is
> specified in device tree in the PMU (the clkout clock supplier) device
> node.
> 
> Similarly as we did for the Odroix U3:
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/exynos4412-odroid-common.dtsi#n39
> 
> Relying on the clk_set_rate() to set the parent clock is not optimal
> IMO. Presumably you need to set select stable parent clock for clkout
> like XXTI. But I'm not very familiar with exyno5250 and that might be
> something different.
> 

Thanks a lot for your suggestion. I'll drop Tushar's patch to allow
clkout to be reparent during set_rate then and change his DTS patch
to set a default parent for CLKOUT using "assigned-clock-parents".

Best regards,
Javier