Subject: [PATCH v2 6/8] mmc: sdhci-st: Update the quirks for this controller.

From: [email-masked] (Maxime Coquelin)
Date: Tue, 3 Mar 2015 11:57:47 +0100

On 02/26/2015 02:10 PM, Peter Griffin wrote:
> Some additional quirks need to be enabled now we support UHS
> modes. This avoids some spurious warnings like
>
> "Got data interrupt 0x00000002 even though no data operation was in progress"
>
> Testing on stih410-b2120 board achieves the following speeds
> with HS200 eMMC card.
>
> max-frequency = 200Mhz
> /dev/mmcblk0p1:
>   Timing buffered disk reads: 270 MB in  3.02 seconds =  89.54 MB/sec
>
> max-frequency = 100Mhz
> root at debian-armhf:~# hdparm -t /dev/mmcblk0p1
> /dev/mmcblk0p1:
>   Timing buffered disk reads: 210 MB in  3.00 seconds =  70.00 MB/sec
>
> max-frequency = 50Mhz
> root at debian-armhf:~# hdparm -t /dev/mmcblk0p1
> /dev/mmcblk0p1:
>   Timing buffered disk reads: 118 MB in  3.00 seconds =  39.28 MB/sec
>
> This is better than the 3.10 kernel which achieves 77.59 MB/sec
> at 200Mhz clock (same board/soc/eMMC).
>
> Signed-off-by: Peter Griffin <[email-masked]>
> Signed-off-by: Giuseppe Cavallaro <[email-masked]>
> ---
>   drivers/mmc/host/sdhci-st.c | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
>

Acked-by: Maxime Coquelin <[email-masked]>

Thanks,
Maxime