Subject: [PATCH v3 2/3] pci: iproc: Add Broadcom iProc PCIe support

From: [email-masked] (Ray Jui)
Date: Fri, 6 Mar 2015 09:26:05 -0800

Hi Paul,

On 3/6/2015 3:00 AM, Paul Bolle wrote:
> On Thu, 2015-03-05 at 17:01 -0800, Ray Jui wrote:
>> --- a/drivers/pci/host/Kconfig
>> +++ b/drivers/pci/host/Kconfig
>> @@ -106,4 +106,21 @@ config PCI_VERSATILE
>>  	bool "ARM Versatile PB PCI controller"
>>  	depends on ARCH_VERSATILE
>>  
>> +config PCIE_IPROC
>> +	bool "Broadcom iProc PCIe controller"
> 
> bool symbol.
> 
>> +	help
>> +	  This enables the iProc PCIe core controller support for Broadcom's
>> +	  iProc family of SoCs. An appropriate bus interface driver also needs
>> +	  to be enabled
>> +
>> +config PCIE_IPROC_PLTFM
>> +	bool "Broadcom iProc PCIe platform bus driver"
> 
> Another bool symbol.
> 
>> +	depends on ARCH_BCM_IPROC || COMPILE_TEST
>> +	depends on OF
>> +	select PCIE_IPROC
>> +	default ARCH_BCM_IPROC
>> +	help
>> +	  Say Y here if you want to use the Broadcom iProc PCIe controller
>> +	  through the generic platform bus interface
>> +
>>  endmenu
> 
>> --- a/drivers/pci/host/Makefile
>> +++ b/drivers/pci/host/Makefile
> 
>> +obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
>> +obj-$(CONFIG_PCIE_IPROC_PLTFM) += pcie-iproc-pltfm.o
> 
> Both objectfiles will never be part of a module.
> 
>> --- /dev/null
>> +++ b/drivers/pci/host/pcie-iproc-pltfm.c
> 
>> +#include <linux/module.h>
> 
> Is this needed?
> 
>> +MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table);
> 
> This macro will be preprocessed away, won't it?
> 
>> +static struct platform_driver iproc_pcie_pltfm_driver = {
>> +	.driver = {
>> +		.name = "iproc-pcie",
>> +		.of_match_table = of_match_ptr(iproc_pcie_of_match_table),
>> +		.suppress_bind_attrs = true,
>> +	},
>> +	.probe = iproc_pcie_pltfm_probe,
>> +};
>> +module_platform_driver(iproc_pcie_pltfm_driver);
> 
> Perhaps it's clearer to have make this a call to
> platform_driver_register(), put that in a wrapper function, and invoke
> that wrapper function through device_initcall() or similar. I haven't
> actually tested that, so the details could be off.
> 
>> +MODULE_AUTHOR("Ray Jui <[email-masked]>");
>> +MODULE_DESCRIPTION("Broadcom iPROC PCIe platform driver");
>> +MODULE_LICENSE("GPL v2");
> 
> And these three macros will, effectively, be preprocessed away.
> 
>> --- /dev/null
>> +++ b/drivers/pci/host/pcie-iproc.c
> 
>> +#include <linux/module.h>
> 
> See above.
> 
>> +MODULE_AUTHOR("Ray Jui <[email-masked]>");
>> +MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
>> +MODULE_LICENSE("GPL v2");
> 
> Ditto.
> 
> 
> Paul Bolle
> 

So every single PCIe host driver under drivers/pci/host/* has their
config flag of "bool" type, and all of them except pci-keystone-dw.c
have these MODULE based macros in their driver. While I agree with you
that these macros will preprocessed away while compiled as statically
linked in, I thought it's a convention to have these macros in the
driver. At least it provides information on the author, driver
description, and license (although one can also argue you can find all
of those info from the maintainer list, Kconfig, and license header).

Would you be able to sort this out with a developer or subsystem
maintainer who is familiar with this matter and let us know what is the
convention for MODULE macros usage in a driver when its config flag is
set to "bool" instead of "tristate"?

Thanks,

Ray