Subject: [PATCH v7 1/8] ARM: dt: Binding documentation for imx25 ADC/TSC

From: [email-masked] (Jonathan Cameron)
Date: Sat, 07 Mar 2015 17:31:53 +0000

On 03/03/15 07:58, Markus Pargmann wrote:
> This documentation describes the devicetree bindings for the
> ADC/Touchscreen unit of the i.MX25 SoC.
> 
> Signed-off-by: Markus Pargmann <[email-masked]>
Straight forward and sensible.

Acked-by: Jonathan Cameron <[email-masked]>

> ---
> 
> Notes:
>     Changes in v6:
>      - Removed adc-ref property and replaced it with refp and refn for positive and
>        negative references. The properties are optional now as the default
>        behaviour is a positive internal reference voltage and ADC GND as negative
>        reference.
> 
>  .../devicetree/bindings/mfd/fsl-imx25-tsadc.txt    | 46 ++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
> new file mode 100644
> index 000000000000..a857af0eb68c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
> @@ -0,0 +1,46 @@
> +Freescale mx25 ADC/TSC multifunction device
> +
> +This device combines two general purpose conversion queues one used for general
> +ADC and the other used for touchscreens.
> +
> +Required properties:
> + - compatible: Should be "fsl,imx25-tsadc".
> + - reg: Memory range of the device.
> + - interrupts: Interrupt for this device as described in
> +   interrupts/interrupts.txt
> + - clocks: An 'ipg' clock defined as described in clocks/clock.txt
> + - interrupt-controller: This device is an interrupt controller. It controls
> +   the interrupts of both conversion queues.
> + - #interrupt-cells: Should be '<1>'.
> + - #address-cells: Should be '<1>'.
> + - #size-cells: Should be '<1>'.
> + - ranges
> +
> +This device includes two conversion queues which can be added as subnodes.
> +The first queue is for the touchscreen, the second for general purpose ADC.
> +
> +Example:
> +	tscadc: tscadc at 50030000 {
> +		compatible = "fsl,imx25-tsadc";
> +		reg = <0x50030000 0xc>;
> +		interrupts = <46>;
> +		clocks = <&clks 119>;
> +		clock-names = "ipg";
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		tsc: tcq at 50030400 {
> +			compatible = "fsl,imx25-tcq";
> +			reg = <0x50030400 0x60>;
> +			...
> +		};
> +
> +		adc: gcq at 50030800 {
> +			compatible = "fsl,imx25-gcq";
> +			reg = <0x50030800 0x60>;
> +			...
> +		};
> +	};
>