Subject: [PATCH 0/3] 96boards: add thermal senor support to hikey board

From: [email-masked] (kongxinwei)
Date: Fri, 20 Mar 2015 11:10:16 +0800

hi Mark Rutland:

? 2015/3/19 21:59, Mark Rutland ??:
> On Thu, Mar 19, 2015 at 07:57:26AM +0000, kongxinwei wrote:
>> The Linaro connect introduce 96boards series in Hong Kong,The HiKey board
>> is the first board to be certified 96Boards Consumer Edition compatible.
>> This board is based on the HiSilicon SoC. you can get more information
>> from https://www.96boards.org.
>>
>> The hisilicon SoC contains thermal module, this thermal module has 4 sensors,
>>
>> 	- sensor 0: local sensor;
>> 	- sensor 1: remote sensor for ACPU cluster 1;
>> 	- sensor 2: remote sensor for ACPU cluster 2;
>> 	- sensor 3: remote sensor for GPU;
>>
>> It can obtain this device temperature by operating this hardware. The new
>> sensor driver satisfies thermal framework and to realize the ACPU ,GPU and
>> so on to cool function.
>>
>> kongxinwei (3):
>>   thermal: hisilicon: add new hisilicon thermal sensor driver
>>   dts: hi6220: enable thermal sensor for hisilicon SoC
>>   dt-bindings: Document the hi6220 thermal sensor bindings
>>
>>  .../bindings/thermal/hisilicon-thermal.txt         |  51 ++
>>  arch/arm64/boot/dts/hisilicon/hi6220.dtsi          | 153 ++++++
>>  drivers/thermal/Kconfig                            |   8 +
>>  drivers/thermal/Makefile                           |   1 +
>>  drivers/thermal/hisi_thermal.c                     | 531 +++++++++++++++++++++
> 
> Mainline does not have a hi6220 dtsi.
> 
> Which tree is this against?
> 
> What are your dependencies?
> 
> Mark.
> 
Hikey board code are being upstreamed by our team.If hi6220 dtsi be accepted, this patch is ok.

Xinwei

> .