Subject: [PATCH v2 3/4] ARM: berlin: add an ADC node for the BG2Q

From: [email-masked] (Sebastian Hesselbarth)
Date: Tue, 07 Apr 2015 12:25:34 +0200

On 07.04.2015 12:20, Antoine Tenart wrote:
> On Sat, Apr 04, 2015 at 12:25:56PM +0200, Sebastian Hesselbarth wrote:
>> On 03.04.2015 15:06, Antoine Tenart wrote:
>>> This patch adds the ADC node for the Berlin BG2Q, using the newly added
>>> Berlin IIO ADC driver.
>>>
>>> Signed-off-by: Antoine Tenart <[email-masked]>
>>> ---
>>>   arch/arm/boot/dts/berlin2q.dtsi | 8 ++++++++
>>>   1 file changed, 8 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
>>> index 187d056f7ad2..72b1c969a99d 100644
>>> --- a/arch/arm/boot/dts/berlin2q.dtsi
>>> +++ b/arch/arm/boot/dts/berlin2q.dtsi
>>> @@ -565,6 +565,14 @@
>>>   						function = "twsi3";
>>>   					};
>>>   				};
>>> +
>>> +				adc: adc {
>>> +					compatible = "marvell,berlin2-adc";
>>> +					interrupt-parent = <&sic>;
>>> +					interrupts = <12>, <14>;
>>> +					interrupt-names = "adc", "tsen";
>>> +					status = "disabled";
>>> +				};
>>
>> nit: there is no gated clock for the ADC, I guess we can just always
>> enable it. That will save you the last patch of the series.
>
> Sure, we can just drop the last patch (and the status property).

Ok.

>> BTW, I have the strong feeling that moving berlin's clk drivers to
>> regmap will block any subsequent patches you are preparing. How about
>> we target the next merge window for moving the clk node but not the
>> drivers (except of_iomap of the _parent's_ reg property) and push the
>> less controversal patches (pinctrl, reset) with regmap/syscon forward?
>
> The entire clock rework series does not affect this ADC series or any
> other on going series. It can be merged latter, without breaking
> anything. I just realized I mentioned the clock rework series as a
> dependency in the cover letter of this series but it is not, my bad.
>
> So, we can target the next merge window for all series but the clock
> rework. In addition to this, I can send a series moving the clock node,
> with minor modifications to the driver so we have a proper dt. And then
> we can see if moving to a regmap aware clock driver can be done.
>
> To sum up:
> - chip/system controller series can be pushed

Ok, I'll pick it up once 4.0 drops.

> - this ADC series too, as it does not depend on the clock rework (as
>    soon as we have the needed acked-by)

Ok, once the ACKs are there, I'll pick it up too.

> - I need to make a new series to move the clock node

Great.

> - the clock driver rework series can live in parallel

Good.

> Agreed?

Definitely :)

Sebastian