Subject: [PATCH] ARM: dts: vf610: Extend I2C support to all available busses.

From: [email-masked] (Cory Tusar)
Date: Wed, 20 May 2015 09:31:41 -0400

On 05/19/2015 10:45 PM, Cory Tusar wrote:
> This commit extends the existing Vybrid I2C support to cover busses
> I2C1, I2C2, and I2C3.

And...I'm going to NAK my version of this patch - the i2c2 and i2c3
mappings should be under aips1 rather than aips0.

Also, I see that Stefan has a similar change up in the linux-toradex
tree:

http://git.toradex.com/cgit/linux-toradex.git/commit/arch/arm/boot/dts/vfxxx.dtsi?h=toradex_vf_4.0&id=7863765e0f3d2a20a0a69e49c44c1e2f96608c8f

I'll follow-up with him directly about resolving differences in our two
implementations.

- -Cory

> Signed-off-by: Cory Tusar <[email-masked]>
> ---
>  arch/arm/boot/dts/vfxxx.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
> index 4aa3351..ec98b6c 100644
> --- a/arch/arm/boot/dts/vfxxx.dtsi
> +++ b/arch/arm/boot/dts/vfxxx.dtsi
> @@ -347,6 +347,48 @@
>  				status = "disabled";
>  			};
>  
> +			i2c1: i2c at 40067000 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				compatible = "fsl,vf610-i2c";
> +				reg = <0x40067000 0x1000>;
> +				interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clks VF610_CLK_I2C1>;
> +				clock-names = "ipg";
> +				dmas = <&edma0 0 52>,
> +					<&edma0 0 53>;
> +				dma-names = "rx","tx";
> +				status = "disabled";
> +			};
> +
> +			i2c2: i2c at 400e6000 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				compatible = "fsl,vf610-i2c";
> +				reg = <0x400e6000 0x1000>;
> +				interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clks VF610_CLK_I2C2>;
> +				clock-names = "ipg";
> +				dmas = <&edma0 1 36>,
> +					<&edma0 1 37>;
> +				dma-names = "rx","tx";
> +				status = "disabled";
> +			};
> +
> +			i2c3: i2c at 400e7000 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				compatible = "fsl,vf610-i2c";
> +				reg = <0x400e7000 0x1000>;
> +				interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clks VF610_CLK_I2C3>;
> +				clock-names = "ipg";
> +				dmas = <&edma0 1 38>,
> +					<&edma0 1 39>;
> +				dma-names = "rx","tx";
> +				status = "disabled";
> +			};
> +
>  			clks: ccm at 4006b000 {
>  				compatible = "fsl,vf610-ccm";
>  				reg = <0x4006b000 0x1000>;
> 

- -- 
Cory T. Tusar
Principal
PID 1 Solutions, Inc.
(814) 553-8619

"There are two ways of constructing a software design.  One way is to
 make it so simple that there are obviously no deficiencies, and the
 other way is to make it so complicated that there are no obvious
 deficiencies."  --Sir Charles Anthony Richard Hoare