From: sebastian.hesselbarth@gmail•com (Sebastian Hesselbarth)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v2] ARM: berlin: add SPI nodes for BG2Q
Date: Wed, 27 May 2015 10:03:01 +0200 [thread overview]
Message-ID: <55657A35.2090402@gmail.com> (raw)
In-Reply-To: <1432713573-32147-1-git-send-email-antoine.tenart@free-electrons.com>
On 27.05.2015 09:59, Antoine Tenart wrote:
> The BG2Q SoC has two SPI controllers. Add the corresponding nodes.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons•com>
> ---
>
> Changes since v1:
> - reworked the pinmux
> - removed useless interrupt-parent properties
> - typo
>
> arch/arm/boot/dts/berlin2q.dtsi | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> index 187d056f7ad2..9f42ebfa50f2 100644
> --- a/arch/arm/boot/dts/berlin2q.dtsi
> +++ b/arch/arm/boot/dts/berlin2q.dtsi
> @@ -286,6 +286,19 @@
> status = "disabled";
> };
>
> + spi0: spi at 1c00 {
> + compatible = "snps,dw-apb-ssi";
> + reg = <0x1c00 0x100>;
> + interrupts = <7>;
> + clocks = <&chip_clk CLKID_CFG>;
> + pinctrl-0 = <&spi1_pmux>;
Antoine,
you missed s/spi0/spi1/ and the same for the node below?
BTW, you have any SPI device to test this? If you are brave
enough you could read the flash from the Berlin secure boot
SPI key ;)
Sebastian
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + num-cs = <4>;
> + status = "disabled";
> + };
> +
> timer0: timer at 2c00 {
> compatible = "snps,dw-apb-timer";
> reg = <0x2c00 0x14>;
> @@ -383,6 +396,11 @@
> groups = "G7";
> function = "twsi1";
> };
> +
> + spi1_pmux: spi1-pmux {
> + groups = "G8";
> + function = "spi1";
> + };
> };
>
> chip_rst: reset {
> @@ -473,6 +491,19 @@
> };
> };
>
> + spi1: spi at 6000 {
> + compatible = "snps,dw-apb-ssi";
> + reg = <0x6000 0x100>;
> + interrupts = <5>;
> + clocks = <&refclk>;
> + pinctrl-0 = <&spi2_pmux>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + num-cs = <4>;
> + status = "disabled";
> + };
> +
> i2c2: i2c at 7000 {
> compatible = "snps,designware-i2c";
> #address-cells = <1>;
> @@ -564,6 +595,11 @@
> groups = "GSM14";
> function = "twsi3";
> };
> +
> + spi2_pmux: spi2-pmux {
> + groups = "GSM3";
> + function = "spi2";
> + };
> };
> };
>
>
next prev parent reply other threads:[~2015-05-27 8:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-27 7:59 [PATCH v2] ARM: berlin: add SPI nodes for BG2Q Antoine Tenart
2015-05-27 8:03 ` Sebastian Hesselbarth [this message]
2015-05-27 8:33 ` Antoine Tenart
2015-05-27 8:39 ` Sebastian Hesselbarth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55657A35.2090402@gmail.com \
--to=sebastian.hesselbarth@gmail$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox