Subject: [RFC PATCH v1 1/3] PCI: designware: Add ARM64 support

From: [email-masked] (Zhou Wang)
Date: Wed, 27 May 2015 21:28:13 +0800

On 2015/5/26 16:09, Arnd Bergmann wrote:
> On Monday 25 May 2015 14:10:37 Jingoo Han wrote:
>> 'pp->root_bus_nr' is initialized as '-1' at some soc-specific drivers
>> However, 'sys->busnr' is set as '0, 1, 2 ...' by pcibios_init_hw()
>> in arch/arm/kernel/bios32.c. '0, 1, 2 ...' means the number of
>> each host controller.
>>
>> So, without setting 'pp->root_bus_nr' as '0, 1, 2, ...',
>> it makes the problem.
>>
>> Thus, we need to come up with the way to resolve this.
>>
>> 1. Setting 'pp->root_bus_nr' as '0, 1, 2 ..' by each soc-specific driver.
>>
>> e.g)
>>
>> ./drivers/pci/host/pci-exynos.c
>> @@ -534,7 +534,7 @@ static int __init exynos_add_pcie_port(struct pcie_port *pp,
>>                 }
>>         }
>>  
>> -       pp->root_bus_nr = -1;
>> +       pp->root_bus_nr++;
>>         pp->ops = &exynos_pcie_host_ops;
>>
>> ./drivers/pci/host/pci-imx6.c
>> @@ -541,7 +541,7 @@ static int __init imx6_add_pcie_port(struct pcie_port *pp,
>>                 }
>>         }
>>  
>> -       pp->root_bus_nr = -1;
>> +       pp->root_bus_nr++;
>>         pp->ops = &imx6_pcie_host_ops;
>>  
>> ./drivers/pci/host/pci-keystone.c
>> @@ -312,7 +312,7 @@ static int __init ks_add_pcie_port(struct keystone_pcie *ks_pcie,
>>                         return ret;
>>         }
>>  
>> -       pp->root_bus_nr = -1;
>> +       pp->root_bus_nr++;
>>         pp->ops = &keystone_pcie_host_ops;
>>
>> ./drivers/pci/host/pci-layerscape.c
>> @@ -101,7 +101,7 @@ static int ls_add_pcie_port(struct ls_pcie *pcie)
>>         pp = &pcie->pp;
>>         pp->dev = pcie->dev;
>>         pp->dbi_base = pcie->dbi;
>> -       pp->root_bus_nr = -1;
>> +       pp->root_bus_nr++;
>>         pp->ops = &ls_pcie_host_ops;
>>  
>> ./drivers/pci/host/pcie-spear13xx.c
>> @@ -287,7 +287,7 @@ static int spear13xx_add_pcie_port(struct pcie_port *pp,
>>                 return ret;
>>         }
>>  
>> -       pp->root_bus_nr = -1;
>> +       pp->root_bus_nr++;
>>         pp->ops = &spear13xx_pcie_host_ops;
>>
>>
>> 2. Setting 'pp->root_bus_nr' as '0, 1, 2 ..' by pcie-designware.c
>>
>> I believe that someone will give better idea. 
> 
> Assigning the root bus number through hw_pci is a historic artifact
> from drivers that probe multiple host bridges at the same time.
> Some legacy ARM platforms still do that (specifically all the ones
> that set nr_controllers to >1: dove, mv78xx0, orion5x, and iop),
> but all modern platforms should probe each host bridge separately,
> either from a platform driver probe function, or they only have
> one and hardcode that fact in the ARM platform code.
> 
> For the drivers in drivers/pci/host, we give each host controller
> its own PCI domain, which means we can have overlapping bus numbers
> and do not need the heuristic to split the available 255 bus numbers
> across the present host bridges.
> 
> 	Arnd

Hi Arnd,

Thanks for your explanation about this.

Best Regards,
Zhou

> .