Subject: [PATCH 0/7] ARM CCI PMU updates for 4.2

From: [email-masked] (Suzuki K. Poulose)
Date: Fri, 29 May 2015 10:29:07 +0100

Hi arm-soc folk,

On 26/05/15 10:53, Suzuki K. Poulose wrote:
> From: "Suzuki K. Poulose" <[email-masked]>
>
> Here is the series which adds support for the CCI-500
> PMU. Could you please apply this for 4.2 ?
>
> Please let me know if you need a pull request, I could ask Will to
> setup one.

Gentle ping on this series for 4.2.

Suzuki

> ---
> This series adds the support for CCI-500 PMU,  by
> reusing and rearranging the CCI-400 PMU driver code.
>
> CCI-500 (the new Cache Coherent Interconnect IP) has
> a PMU with 8 independent event counters and supports
> profiling events related to master/slave interfaces
> along with the global events(cci internal events).
>
> The series also adds aliases for events for all the
> supported CCI PMUs(CCI_400{r0,r1}, CCI_500).
>
> Patches 1/7 is a fix posted by Mark Salter, which has
> been posted to arm at kernel.org already. I have included
> it in this series, as this series applies on top of it.
>
> Patches 2-5 - Creates an abstraction of a CCI PMU and
> makes the CCI-400 driver code to make use of the abstraction.
> Patch 6 - Adds the CCI-500 PMU driver support
> Patch 7 - Adds the aliases for CCI PMU events (specific to chipsets).
>
> With the series, one can use named events for the CCI pmus.
>
> e.g, CCI-400
>
>   # perf list | grep CCI
>    CCI_400/cycles/                                    [Kernel PMU event]
>    CCI_400/mi_retry_speculative_fetch,source=?/       [Kernel PMU event]
>
> e.g, CCI-500
>
>   # perf list |grep CCI
>    CCI_500/cci_rq_stall_address_hazard/               [Kernel PMU event]
>    CCI_500/cci_snoop_access_filter_bank_0_1/          [Kernel PMU event]
>
> Testing was performed on a fast model, with perf fuzzer and functional
> tests for the CCI-500 PMU.
> ---
> Changes since V1:  https://lkml.org/lkml/2015/5/5/323
>
> The series remains functionaly pretty much the same, except for a minor
> fix in the Kconfig default for CCI-500.
>    - Pulled in a CCI-400 config fix posted separately,
>      as Patch 1/7.
> 	https://patchwork.kernel.org/patch/6387121/
>    - Add the similar Kconfig changes for CCI-500 as fixed in
>      the patch above.
>    - Dropped Mark Salter's fix for CCI, which is now queued.
>
> Suzuki K. Poulose (7):
>    arm-cci: Do not enable CCI-400 PMU by default
>    arm-cci: Cleanup PMU driver code
>    arm-cci: Abstract out the PMU counter details
>    arm-cci: Abstract handling for CCI events
>    arm-cci: Sanitise CCI400 PMU driver specific code
>    arm-cci: Add CCI-500 PMU support
>    arm-cci: Add aliases for PMU events
>
>   Documentation/devicetree/bindings/arm/cci.txt |    4 +-
>   drivers/bus/Kconfig                           |   31 +-
>   drivers/bus/arm-cci.c                         |  905 ++++++++++++++++++++-----
>   3 files changed, 763 insertions(+), 177 deletions(-)
>