From: valentin.longchamp@keymile•com (Valentin Longchamp)
To: linux-arm-kernel@lists•infradead.org
Subject: [ehci-orion] ETIMEOUT with ehci_setup()'s ehci_halt()
Date: Fri, 05 Jun 2015 16:34:54 +0200 [thread overview]
Message-ID: <5571B38E.7080505@keymile.com> (raw)
Hello,
I am currently bringing up the USB 2.0 Host controller of the Bobcat's (98DX4122
Marvell switch) internal kirkwood CPU on a variation of Keymile's km_kirwood
hardware (kirkwood-km_kirkwood.dts).
When the driver registers its hcd, it fails with a timemout as it can be seen in
the below log:
> root at kmcoge5un:~# dmesg -n 8
> root at kmcoge5un:~# insmod ehci-orion.ko
> ehci-orion: EHCI orion driver
> Initializing Orion-SoC USB Host Controller
> orion-ehci f1050000.ehci: EHCI Host Controller
> orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
> orion-ehci f1050000.ehci: reset hcs_params 0x10011 dbg=0 ind cc=0 pcc=0 ordered ports=1
> orion-ehci f1050000.ehci: reset hcc_params 0006 thresh 0 uframes 256/512/1024 park
> orion-ehci f1050000.ehci: park 0
> orion-ehci f1050000.ehci: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
> orion-ehci f1050000.ehci: can't setup
> orion-ehci f1050000.ehci: USB bus 1 deregistered
> orion-ehci f1050000.ehci: init f1050000.ehci fail, -110
> orion-ehci: probe of f1050000.ehci failed with error -110
This is very similar to this problem, except that it always happens:
https://lkml.org/lkml/2012/6/4/381
I have cornered it out to the last handshake() call of the ehci_halt() call,
that should set the controller in the HALT state. If I comment this handshake()
call out, the registration is fine and the controller then looks OK (I don't
have a hardware with a real USB bus to further test it yet).
My current idea is that maybe a reset or an initialization may be missing, but I
wanted to ask if anybody already has seen a similar behavior with the various
hardware platform supported by ehci-orion ?
Best regards
Valentin
next reply other threads:[~2015-06-05 14:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-05 14:34 Valentin Longchamp [this message]
2015-06-05 15:19 ` [ehci-orion] ETIMEOUT with ehci_setup()'s ehci_halt() Andrew Lunn
2015-06-06 12:17 ` Sebastian Hesselbarth
2015-06-08 11:46 ` Valentin Longchamp
2015-06-12 11:37 ` Valentin Longchamp
2015-06-16 9:06 ` Valentin Longchamp
2015-06-18 1:29 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5571B38E.7080505@keymile.com \
--to=valentin.longchamp@keymile$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox