From: j.anaszewski@samsung•com (Jacek Anaszewski)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v5 02/17] leds: port locomo leds driver to new locomo core
Date: Tue, 09 Jun 2015 13:35:54 +0200 [thread overview]
Message-ID: <5576CF9A.4010701@samsung.com> (raw)
In-Reply-To: <20150609111130.GT2982@x1>
On 06/09/2015 01:11 PM, Lee Jones wrote:
> On Tue, 09 Jun 2015, Dmitry Eremin-Solenikov wrote:
>
>> 2015-06-09 9:57 GMT+03:00 Lee Jones <lee.jones@linaro•org>:
>>> On Mon, 08 Jun 2015, Dmitry Eremin-Solenikov wrote:
>>>
>>>> Adapt locomo leds driver to new locomo core setup.
>>>>
>>>> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail•com>
>>>> Acked-by: Jacek Anaszewski <j.anaszewski@samsung•com>
>>>
>>> This is missing Bryan's Ack.
>>
>> Jacek is listed as a co-maintainer of the LEDS subsystem, so I assumed
>> that his acked-by is enough.
>
> Ah, this is new.
>
> Congratulations Jacek.
Thanks.
> Ignore me then.
I think that it should go via mfd tree, as this patch adds
dependency on header linux/mfd/locomo.h, which is added
in one of the preceding patches [1] in this series.
[1] [PATCH v3 01/17] mfd: add new driver for Sharp LoCoMo
>>>> ---
>>>> drivers/leds/Kconfig | 2 +-
>>>> drivers/leds/leds-locomo.c | 117 +++++++++++++++++++++++----------------------
>>>> 2 files changed, 61 insertions(+), 58 deletions(-)
>>>>
>>>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>>>> index 966b960..d086aac 100644
>>>> --- a/drivers/leds/Kconfig
>>>> +++ b/drivers/leds/Kconfig
>>>> @@ -79,7 +79,7 @@ config LEDS_LM3642
>>>> config LEDS_LOCOMO
>>>> tristate "LED Support for Locomo device"
>>>> depends on LEDS_CLASS
>>>> - depends on SHARP_LOCOMO
>>>> + depends on MFD_LOCOMO
>>>> help
>>>> This option enables support for the LEDs on Sharp Locomo.
>>>> Zaurus models SL-5500 and SL-5600.
>>>> diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
>>>> index 80ba048..a4286e9 100644
>>>> --- a/drivers/leds/leds-locomo.c
>>>> +++ b/drivers/leds/leds-locomo.c
>>>> @@ -9,89 +9,92 @@
>>>> */
>>>>
>>>> #include <linux/kernel.h>
>>>> -#include <linux/init.h>
>>>> -#include <linux/module.h>
>>>> -#include <linux/device.h>
>>>> #include <linux/leds.h>
>>>> +#include <linux/mfd/locomo.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/platform_device.h>
>>>> +#include <linux/regmap.h>
>>>>
>>>> -#include <mach/hardware.h>
>>>> -#include <asm/hardware/locomo.h>
>>>> +struct locomo_led {
>>>> + struct led_classdev led;
>>>> + struct regmap *regmap;
>>>> + unsigned int reg;
>>>> +};
>>>>
>>>> static void locomoled_brightness_set(struct led_classdev *led_cdev,
>>>> - enum led_brightness value, int offset)
>>>> -{
>>>> - struct locomo_dev *locomo_dev = LOCOMO_DEV(led_cdev->dev->parent);
>>>> - unsigned long flags;
>>>> -
>>>> - local_irq_save(flags);
>>>> - if (value)
>>>> - locomo_writel(LOCOMO_LPT_TOFH, locomo_dev->mapbase + offset);
>>>> - else
>>>> - locomo_writel(LOCOMO_LPT_TOFL, locomo_dev->mapbase + offset);
>>>> - local_irq_restore(flags);
>>>> -}
>>>> -
>>>> -static void locomoled_brightness_set0(struct led_classdev *led_cdev,
>>>> enum led_brightness value)
>>>> {
>>>> - locomoled_brightness_set(led_cdev, value, LOCOMO_LPT0);
>>>> + struct locomo_led *led = container_of(led_cdev, struct locomo_led, led);
>>>> +
>>>> + regmap_write(led->regmap, led->reg,
>>>> + value ? LOCOMO_LPT_TOFH : LOCOMO_LPT_TOFL);
>>>> }
>>>>
>>>> -static void locomoled_brightness_set1(struct led_classdev *led_cdev,
>>>> - enum led_brightness value)
>>>> +static int locomo_led_register(
>>>> + struct device *dev,
>>>> + struct locomo_led *led,
>>>> + const char *name,
>>>> + const char *trigger,
>>>> + struct regmap *regmap,
>>>> + unsigned int reg)
>>>> {
>>>> - locomoled_brightness_set(led_cdev, value, LOCOMO_LPT1);
>>>> + led->led.name = name;
>>>> + led->led.flags = LED_CORE_SUSPENDRESUME;
>>>> + led->led.default_trigger = trigger;
>>>> + led->led.brightness_set = locomoled_brightness_set;
>>>> + led->regmap = regmap;
>>>> + led->reg = reg;
>>>> +
>>>> + return devm_led_classdev_register(dev, &led->led);
>>>> }
>>>>
>>>> -static struct led_classdev locomo_led0 = {
>>>> - .name = "locomo:amber:charge",
>>>> - .default_trigger = "main-battery-charging",
>>>> - .brightness_set = locomoled_brightness_set0,
>>>> -};
>>>> -
>>>> -static struct led_classdev locomo_led1 = {
>>>> - .name = "locomo:green:mail",
>>>> - .default_trigger = "nand-disk",
>>>> - .brightness_set = locomoled_brightness_set1,
>>>> -};
>>>> -
>>>> -static int locomoled_probe(struct locomo_dev *ldev)
>>>> +static int locomoled_probe(struct platform_device *pdev)
>>>> {
>>>> int ret;
>>>> -
>>>> - ret = led_classdev_register(&ldev->dev, &locomo_led0);
>>>> + struct locomo_led *leds;
>>>> + struct regmap *regmap;
>>>> +
>>>> + leds = devm_kzalloc(&pdev->dev, 2 * sizeof(*leds), GFP_KERNEL);
>>>> + if (!leds)
>>>> + return -ENOMEM;
>>>> +
>>>> + regmap = dev_get_regmap(pdev->dev.parent, NULL);
>>>> + if (!regmap)
>>>> + return -ENODEV;
>>>> +
>>>> + ret = locomo_led_register(
>>>> + &pdev->dev,
>>>> + leds,
>>>> + "locomo:amber:charge",
>>>> + "main-battery-charging",
>>>> + regmap,
>>>> + LOCOMO_LPT0);
>>>> if (ret < 0)
>>>> return ret;
>>>>
>>>> - ret = led_classdev_register(&ldev->dev, &locomo_led1);
>>>> + ret = locomo_led_register(
>>>> + &pdev->dev,
>>>> + leds + 1,
>>>> + "locomo:green:mail",
>>>> + "mmc0",
>>>> + regmap,
>>>> + LOCOMO_LPT1);
>>>> if (ret < 0)
>>>> - led_classdev_unregister(&locomo_led0);
>>>> -
>>>> - return ret;
>>>> -}
>>>> + return ret;
>>>>
>>>> -static int locomoled_remove(struct locomo_dev *dev)
>>>> -{
>>>> - led_classdev_unregister(&locomo_led0);
>>>> - led_classdev_unregister(&locomo_led1);
>>>> return 0;
>>>> }
>>>>
>>>> -static struct locomo_driver locomoled_driver = {
>>>> - .drv = {
>>>> - .name = "locomoled"
>>>> +static struct platform_driver locomoled_driver = {
>>>> + .driver = {
>>>> + .name = "locomo-led"
>>>> },
>>>> - .devid = LOCOMO_DEVID_LED,
>>>> .probe = locomoled_probe,
>>>> - .remove = locomoled_remove,
>>>> };
>>>>
>>>> -static int __init locomoled_init(void)
>>>> -{
>>>> - return locomo_driver_register(&locomoled_driver);
>>>> -}
>>>> -module_init(locomoled_init);
>>>> +module_platform_driver(locomoled_driver);
>>>>
>>>> MODULE_AUTHOR("John Lenz <lenz@cs•wisc.edu>");
>>>> MODULE_DESCRIPTION("Locomo LED driver");
>>>> MODULE_LICENSE("GPL");
>>>> +MODULE_ALIAS("platform:locomo-led");
>>>
>>
>>
>>
>
--
Best Regards,
Jacek Anaszewski
next prev parent reply other threads:[~2015-06-09 11:35 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-08 20:56 [PATCH v5 00/17] new LoCoMo driver set Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 01/17] mfd: add new driver for Sharp LoCoMo Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 02/17] leds: port locomo leds driver to new locomo core Dmitry Eremin-Solenikov
2015-06-09 6:57 ` Lee Jones
2015-06-09 8:08 ` Dmitry Eremin-Solenikov
2015-06-09 11:11 ` Lee Jones
2015-06-09 11:35 ` Jacek Anaszewski [this message]
2015-06-09 18:51 ` Lee Jones
2015-06-15 18:43 ` Bryan Wu
2015-06-08 20:56 ` [PATCH v5 03/17] input: convert LoCoMo keyboard driver to use " Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 04/17] input: locomokbd: differentiate between two Enter keys Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 05/17] input: make LoCoMo keyboard driver support both poodle and collie Dmitry Eremin-Solenikov
2015-06-14 15:11 ` Russell King - ARM Linux
2015-06-14 16:26 ` Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 06/17] video: backlight: add new locomo backlight driver Dmitry Eremin-Solenikov
2015-06-14 15:13 ` Russell King - ARM Linux
2015-06-14 16:17 ` Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 07/17] video: lcd: add LoCoMo LCD driver Dmitry Eremin-Solenikov
2015-06-14 15:18 ` Russell King - ARM Linux
2015-06-14 16:28 ` Dmitry Eremin-Solenikov
2015-06-14 17:16 ` Russell King - ARM Linux
2015-06-08 20:56 ` [PATCH v5 08/17] gpio: port LoCoMo gpio support from old driver Dmitry Eremin-Solenikov
2015-06-14 15:27 ` Russell King - ARM Linux
2016-05-11 8:34 ` Linus Walleij
2015-06-08 20:56 ` [PATCH v5 09/17] gpio: locomo: implement per-pin irq handling Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 10/17] i2c: add locomo i2c driver Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 11/17] ARM: sa1100: make collie use new locomo drivers Dmitry Eremin-Solenikov
2015-06-14 15:06 ` Russell King - ARM Linux
2015-06-08 20:56 ` [PATCH v5 12/17] ARM: sa1100: don't preallocate IRQ space for locomo Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 13/17] ASoC: pxa: poodle: make use of new locomo GPIO interface Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 14/17] ARM: pxa: poodle: use new LoCoMo driver Dmitry Eremin-Solenikov
2015-06-14 15:08 ` Russell King - ARM Linux
2015-06-08 20:56 ` [PATCH v5 15/17] ARM: pxa: poodle: don't preallocate IRQ space for locomo Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 16/17] video: backlight: drop old locomo bl/lcd driver Dmitry Eremin-Solenikov
2015-06-09 6:55 ` Lee Jones
2015-06-08 20:56 ` [PATCH v5 17/17] ARM: drop old LoCoMo driver Dmitry Eremin-Solenikov
2015-06-14 13:16 ` [PATCH v5 00/17] new LoCoMo driver set Dmitry Eremin-Solenikov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5576CF9A.4010701@samsung.com \
--to=j.anaszewski@samsung$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox