Subject: [PATCH 1/2] power: reset: at91: add sama5d3 reset function

From: [email-masked] (Josh Wu)
Date: Fri, 10 Jul 2015 11:06:52 +0800

Hi, Maxime

On 7/9/2015 8:03 PM, Maxime Ripard wrote:
> Hi,
>
> On Thu, Jul 09, 2015 at 06:15:46PM +0800, Josh Wu wrote:
>> As since sama5d3, to reset the chip, we don't need to shutdown the ddr
>> controller.
>>
>> So add a new compatible string and new restart function for sama5d3 and
>> later chips. As we don't use sama5d3 ddr controller, so remove it as
>> well.
>>
>> Signed-off-by: Josh Wu <[email-masked]>
>> Acked-by: Nicolas Ferre <[email-masked]>
>> ---
>>
>>   drivers/power/reset/at91-reset.c | 30 +++++++++++++++++++++---------
>>   1 file changed, 21 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
>> index 36dc52f..8944b63 100644
>> --- a/drivers/power/reset/at91-reset.c
>> +++ b/drivers/power/reset/at91-reset.c
>> @@ -123,6 +123,14 @@ static int at91sam9g45_restart(struct notifier_block *this, unsigned long mode,
>>   	return NOTIFY_DONE;
>>   }
>>   
>> +static int sama5d3_restart(struct notifier_block *this, unsigned long mode,
>> +			void *cmd)
>> +{
>> +	writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST),
>> +				at91_rstc_base);
>> +	return NOTIFY_DONE;
>> +}
>> +
>>   static void __init at91_reset_status(struct platform_device *pdev)
>>   {
>>   	u32 reg = readl(at91_rstc_base + AT91_RSTC_SR);
>> @@ -155,13 +163,13 @@ static void __init at91_reset_status(struct platform_device *pdev)
>>   static const struct of_device_id at91_ramc_of_match[] = {
>>   	{ .compatible = "atmel,at91sam9260-sdramc", },
>>   	{ .compatible = "atmel,at91sam9g45-ddramc", },
>> -	{ .compatible = "atmel,sama5d3-ddramc", },
>>   	{ /* sentinel */ }
>>   };
>>   
>>   static const struct of_device_id at91_reset_of_match[] = {
>>   	{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9260_restart },
>>   	{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
>> +	{ .compatible = "atmel,sama5d3-rstc", .data = sama5d3_restart },
>>   	{ /* sentinel */ }
>>   };
>>   
>> @@ -181,17 +189,21 @@ static int at91_reset_of_probe(struct platform_device *pdev)
>>   		return -ENODEV;
>>   	}
>>   
>> -	for_each_matching_node(np, at91_ramc_of_match) {
>> -		at91_ramc_base[idx] = of_iomap(np, 0);
>> -		if (!at91_ramc_base[idx]) {
>> -			dev_err(&pdev->dev, "Could not map ram controller address\n");
>> -			return -ENODEV;
>> +	match = of_match_node(at91_reset_of_match, pdev->dev.of_node);
>> +	at91_restart_nb.notifier_call = match->data;
>> +
>> +	if (match->data != sama5d3_restart) {
> Using of_device_is_compatible seems more appropriate.
>
> Also, why are you changing the order of this loop and the notifier
> registration?

I moved this order because I use the match->data to compare whether is 
sama5d3_restart. So I need to move this function (of_match_node) up.

Best Regards,
Josh Wu

> Maxime