Subject: [RFC 1/3] docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.

From: [email-masked] (Michal Simek)
Date: Fri, 24 Jul 2015 09:27:53 +0200

On 07/24/2015 09:25 AM, Philipp Zabel wrote:
> Am Donnerstag, den 23.07.2015, 15:51 -0700 schrieb Moritz Fischer:
>> Signed-off-by: Moritz Fischer <[email-masked]>
>> ---
>>  Documentation/devicetree/bindings/reset/zynq-reset-pl.txt | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
>>
>> diff --git a/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
>> new file mode 100644
>> index 0000000..ac4499e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
>> @@ -0,0 +1,13 @@
>> +Xilinx Zynq PL Reset Manager
>> +
>> +Required properties:
>> +- compatible: "xlnx,zynq-reset-pl"
>> +- syscon <&slcr>;
>> +- #reset-cells: 1
>> +
>> +Example:
>> +	rstc: rstc at 240 {
>> +		#reset-cells = <1>;
>> +		compatible = "xlnx,zynq-reset-pl";
>> +		syscon = <&slcr>;
>> +	};
> 
> Instead of the syscon property, why not specify that the rstc node must
> be a child of the slcr node?

FYI: It is already a child node of SLCR if you look at location in DTS.

Thanks,
Michal