Subject: [PATCH-v2 2/2] regulator: 88pm800: Add support for configuration of dual phase on BUCK1

From: [email-masked] (Vaibhav Hiremath)
Date: Wed, 05 Aug 2015 14:15:59 +0530

On Thursday 23 July 2015 10:21 AM, Krzysztof Kozlowski wrote:
> 2015-07-22 1:23 GMT+09:00 Vaibhav Hiremath <[email-masked]>:
>> 88PM860 device supports dual phase mode on BUCK1 output.
>> In normal usecase, BUCK1A and BUCK1B operates independently with 3A
>> capacity. And they both can work as a dual phase providing 6A capacity.
>>
>> This patch updates the regulator driver to read the respective
>> DT property and enable dual-phase mode on BUCK1.
>>
>> Note that, this is init time (one time) initialization.
>>

Sorry for delayed response, was on bed rest almost for week.

>> Signed-off-by: Vaibhav Hiremath <[email-masked]>
>> ---
>>   drivers/regulator/88pm800.c | 31 +++++++++++++++++++++++++++++++
>>   include/linux/mfd/88pm80x.h |  3 +++
>>   2 files changed, 34 insertions(+)
>
> Don't you need to update the constraints also? I think the BUCK1
> regulator has fixed constraint of 3 A:
>    PM800_BUCK(buck1, BUCK1, BUCK_ENA, 0, 3000000, buck1_volt_range, 0x55),
> and now it can handle 6 A.
>

Actually, BUCK1A and BUCK1B both combined together provide 6A capacity.
And as discussed earlier, we need board change for this.

I am quite not sure.

Should I read the property and update the constraint runtime during
probe?

>>
>> diff --git a/drivers/regulator/88pm800.c b/drivers/regulator/88pm800.c
>> index e846e4c..1bf2b35 100644
>> --- a/drivers/regulator/88pm800.c
>> +++ b/drivers/regulator/88pm800.c
>> @@ -267,6 +267,31 @@ static struct pm800_regulator_info pm860_regulator_info[] = {
>>          PM800_LDO(ldo20, LDO20, LDO_ENA1_3, 3, 10000, ldo_volt_table2),
>>   };
>>
>> +static int pm800_regulator_init(struct platform_device *pdev)
>> +{
>> +       struct pm800_regulators *pm800_data = platform_get_drvdata(pdev);
>> +       struct pm80x_chip *chip = pm800_data->chip;
>> +       int ret;
>
> 'ret' is used only in if statement below. I don't have strong feelings
> but can you move it there to limit its scope or always return 'ret'
> (after initializing to '0'). To me this would be more readable.
>

OK, will fix in V3.

I will wait to close on constraint discussion above.

Thanks,
Vaibhav

> Best regards,
> Krzysztof
>
>> +
>> +       /* Currently only supported on 88pm860 device */
>> +       if (chip->type != CHIP_PM860)
>> +               return 0;
>> +
>> +       if (of_property_read_bool(pdev->dev.of_node,
>> +                               "marvell,88pm860-buck1-dualphase-en")) {
>> +               ret = regmap_update_bits(chip->subchip->regmap_power,
>> +                                       PM860_BUCK1_MISC,
>> +                                       BUCK1_DUAL_PHASE_SEL,
>> +                                       BUCK1_DUAL_PHASE_SEL);
>> +               if (ret) {
>> +                       dev_err(chip->dev, "failed to set dual-pase mode %d\n", ret);
>> +                       return ret;
>> +               }
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>>   static int pm800_regulator_probe(struct platform_device *pdev)
>>   {
>>          struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
>> @@ -336,6 +361,12 @@ static int pm800_regulator_probe(struct platform_device *pdev)
>>                  }
>>          }
>>
>> +       ret = pm800_regulator_init(pdev);
>> +       if (ret) {
>> +               dev_err(&pdev->dev, "failed to init 88pm800 regulator device\n");
>> +               return ret;
>> +       }
>> +
>>          return 0;
>>   }
>>
>> diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
>> index a92d173..05d9bad 100644
>> --- a/include/linux/mfd/88pm80x.h
>> +++ b/include/linux/mfd/88pm80x.h
>> @@ -295,6 +295,9 @@ enum {
>>   #define PM860_BUCK4_MISC2              (0x82)
>>   #define PM860_BUCK4_FULL_DRV           BIT(2)
>>
>> +#define PM860_BUCK1_MISC               (0x8E)
>> +#define BUCK1_DUAL_PHASE_SEL           BIT(2)
>> +
>>   struct pm80x_rtc_pdata {
>>          int             vrtc;
>>          int             rtc_wakeup;
>> --
>> 1.9.1
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel